FAQ 534: How to synchronize RTMaps Clock with PC system time
Question
In RTMaps, Timestamp is displayed starting from 0 at the beginning of the simulation.
How can I show timestamps using the PC system time (real-time clock in 24-hour format)?
Solution
In RTMaps, Timestamp and Time of issue are based on the RTMaps standard clock, which starts from 0 at the beginning of the simulation.
However, RTMaps can also display and record timestamps using real-world time, such as the Windows system time.
To use system clock, follow these steps:
- Find “System clock” component from “Time” in “Registered Components” tab and add it to the diagram.
- Click on an empty area in the RTMaps diagram to open the “Engine Properties”.
- Select the System clock you added in “Current Clock” option.
Timestamp and Time of issue are represented as microseconds.
When the system clock is used, they correspond to the time elapsed since the origin of Coordinated Universal Time (UTC).
However, VCR window displays this timestamp as local time.
Display in Local Time
When you check the VCR window in RTMaps, the “Time” field displays the local time.
You can open the VCR window by following steps:
- Open ”Window” menu at the top of the RTMaps screen.
- Select “VCR” and “Window”.
Tags
| Date | 2026-08-28 |
| Informationstyp | FAQ (Häufig gestellte Fragen) |