Discover the new mydSPACE services: License Management, the new dSPACE Help, and dSPACE Chatbot for User Documentation. Find more information and support on our dedicated support page. Learn more & get support

FAQ 280: Error message "DAQ/STIM list is inconsistent", RCP

Question

A warning message "The mode configuration of a DAQ/STIM list is inconsistent. (failure checking not supported without service" appears in the “DCI-GSI2 Status > Device Message” section of the DCI Configuration Tool.(*1) Is there any way to resolve this issue?

*1

Solution

In the Access Configuration of the ECU Interface Manager, which is used to create EIC files, disabling the "Data Receive Synchronization"[Fig.1] property may stop the warning message. One possible cause of this warning is that the configured Event Channel does not support the "Double Buffer Mechanism," also known as the failure check mechanism. By disabling the Data Receive Configuration, it implies that the Double Buffer Mechanism will not be used, thereby resolving the configuration mismatch. 

Fig.1 the property of Data Receive Synchronization 

The “Data Receive Synchronization” property reflects the configuration defined in the A2L file. Therefore, if the section of “XCP_Bypassing” in “IF_DATA dSPACE_XCP” definition is set as shown below in the A2L file[Table 1], it will be treated as disabled in the ECU Interface Manager[Fig.2].

Table 1 Section “IF_DATA dSPACE_XCP” is defined in A2L 

  /begin IF_DATA dSPACE_XCP 
    0x00010100           /* AML version  1.1.0 = 0x00010100 */ 

    /begin XCP_Bypassing 
      NOT_SUPPORTED       /* enable double buffer mode */ 
      NOT_SUPPORTED       /* enable ECU wait mechanism */ 
      NOT_SUPPORTED       /* enable failure checking */ 
      NOT_SUPPORTED       /* enable failsafe page */ 
    /end XCP_Bypassing 

  /end IF_DATA 

Fig.2 Disabled Data Receive Synchronization 

Tags

Date 2026-11-02
Informationstyp FAQ (Häufig gestellte Fragen)

Immer auf dem neuesten Stand mit unserem Newsletter-Service.

Mit unserem Newsletter-Service informieren wir Sie über aktuelle Anwendungsbeispiele, neue Lösungen und Produkte sowie über Schulungen und Veranstaltungen. Hier geht's zur Anmeldung.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.