Introduction
Problems Fixed by this Patch
Limitations
Installation Notes & Download
Introduction
This patch can only be installed on an existing ControlDesk 2.7 (dSPACE Release 5.0) or ControlDesk 2.7.1 (dSPACE Release 5.0 with ModelDesk 1.0) installation. It also contains previous patches for these ControlDesk versions.
Problems Fixed by this Patch
Please refer to the Installation Notes file below.
Limitations
-
Installation Notes & Download
Installation Notes (7 KB)
ControlDesk271p7.exe (3.5 MB)
To install the patch, this setup program must not be started from within the dSPACE root directory. Otherwise the setup cannot be executed. We recommend to save the setup program to the standard temp directory, for example, and to execute it from this location.
When using this patch, it is mandatory to install also a patch for DS1005-12 and MicroAutoBox DS1401-18
regardless of which DS1005 or MicroAutoBox hardware version is actually used.
Date | 2007-08-17 |
소프트웨어 타입 | Experiment and Visualization Software, Bus and Network Software, ECU Interface Software |
제품군 | ControlDesk, RCP and HIL Software |
인포메이션 타입 | 패치 |
인포메이션 카테고리 | Troubleshooting |
dSPACE Release | Prior to 2013-A |
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.