Discover the new mydSPACE services: License Management, the new dSPACE Help, and dSPACE Chatbot for User Documentation. Find more information and support on our dedicated support page. Learn more & get support

FAQ 786: How to Measure and Record Data in ControlDesk Using Downsampling (Instead of HostService)​

Question

I have a simple Simulink model built and run on a DS1401 target. 
I would like to select a raster for recording in ControlDesk 6.3, but I can only select "HostService" which is the sampling time specified in the model.
Is it possible to set and select a different raster in ControlDesk or at build time?
Specifically, I would like to record a raster that is specified as 1ms, but then thinned out to 10ms, 100ms, and so on.

Solution

As a method for performing measurement and recording at integer multiples of the basic sample time, ControlDesk provides the “Down Sampling function”.

Please follow the procedure below.

Setting up downsampling (measurement thinning):

  1. Open a project in ControlDesk.
  2. Right-Click "Measurement Configuration" > "Acquisition" > "Platform" > "HostService". Then select “Properties”.
  1. Downsampling is displayed in “Properties”. (Default setting=1)
    In the default setting, measurement and recording are performed at the basic sample time.
  1. Enter an integer value in the Downsampling field.
    (If the basic sample time is 1 ms, enter 10 for 10 ms, 100 for 100 ms, etc.)
    *Downsampling settings are also applied during recording.

Tags

Date 2026-11-02
인포메이션 타입 FAQ

dSPACE direct 뉴스레터 서비스를 통해 최신 소식을 받아보세요.

dSPACE 뉴스레터 서비스를 통해 최신 use case 와 신규 솔루션 및 제품, 교육 및 이벤트에 대한 정보를 지속적으로 확인하세요. 여기에서 무료 로구독을 신청하세요.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.