dSPACE Release 2014-A has subsequently been qualified for the use with MATLAB R2014a.
To achieve full compatibility, the following patches must be installed
Release 2014-A Implementation-Software Service Pack 2, or newer
VEOS 3.2p3, or newer.
Other products can be used with MATLAB R2014a with their original versions contained in Release 2014-A, except for TargetLink 3.5 and Model Compare 2.4, that do not support MATLAB R2014a at all.
Using RTI, ConfigurationDesk, or VEOS it is still necessary to execute the revertInlineParametersOffToR2013b command before building the (real-time) application. Refer to Support of MATLAB R2014a with dSPACE Release 2014-A.
Note
Even with the above mentioned patches installed, you will get warning messages when connecting an Installation Set from Release 2014-A with MATLAB R2014a.
We decided to keep this behavior also for the modified products.
Additionally you will always get warning messages when installing Release 2014-A under MATLAB R2014a.
Date | 2017-06-26 |
软件类型 | 实现软件 |
产品 | ConfigurationDesk, RTI (Real-Time Interface) |
资料信息 | 通知 |
信息类别 | 迁移, 版本和兼容性 |
dSPACE 版本发布 | 2014-A |
推动创新进程。我们始终在技术开发的最前沿。
欢迎订阅我们简讯,了解我们的专业技术以及产品。希望我们的成功案例能够对您有所帮助。快速了解仿真和验证的最新信息。欢迎订阅/管理dSPACE简讯和dSPACE航空速报。