DS1006 Firmware 1.x
Boot firmware files for use with Releases not supporting DS1006 multi-core boards
Starting with Service Pack 2 for dSPACE Release 6.5 the DS1006 boot firmware (Vs. 2.1.6 or higher) is not compatible to dSPACE Releases without multi-core support anymore.
Thus the boot firmware must be downgraded to a version prior 2.0 when using a DS1006 under Release 6.5 without Service Pack or prior Releases. Below you find the required boot firmware versions for DS1006 multi-core boards (Rev. 6) and single-core boards (Rev. 3). |
The ZIP files comprise the firmware as well as the stand-alone firmware programming tool firmware_update_ds1006.exe.
Download the required ZIP file and extract its contents into a new directory. Open a command line box and enter firmware_update_ds1006.exe to see the program's help page.
Typically this dedicated firmware flashing tool works much faster than the update with ControlDesk.
| Date | 2011-01-11 |
| 产品类型 | 模块化系统 |
| 硬件类型 | PHS硬件 |
| 产品 | DS1006 Processor Board |
| 资料信息 | 补丁 |
| 信息类别 | 常规使用, 故障排除 |
| dSPACE 版本发布 | 2013-A之前版本 |
订阅新闻通讯
订阅/管理订阅/取消订阅 dSPACE新闻简讯