TargetLink AUTOSAR 指南
TargetLink AUTOSAR 指南是对 TargetLink 用户的规定和指导，可引导用户利用 TargetLink 对 AUTOSAR 软件组件 (SWC) 进行建模并执行。特别是本指南含有如下方面：
- 可在框图水平上进行软件组件的建模和运行。
- 在 TargetLink 数据字典中对 AUTOSAR 相关数据作了合理规范。
- 涉及使用 dSPACE SystemDesk 时 SWC 容器互换的使用指南
| Version | Revision Date | Language | Valid for | Link |
| Release 2020-B | 2020-11-27 | English | TargetLink 5.1 and higher |
Please use the AUTOSAR Modeling Guides from the TargetLink user documentation as guideline, because it contains all relevant and most recent information: |
|
Release 2019-B |
2020-11-20 | English |
TargetLink
|
Please use the AUTOSAR Modeling Guide from the TargetLink user documentation as guideline, because it contains all relevant and most recent information: |
| 2.0 | 2013-11-21 | English |
TargetLink |
TargetLink_AUTOSAR_Guidelines.pdf |
| 1.1 | 2011-03-23 | Japanese | TargetLink 3.2 3.1 |
TargetLink_AUTOSAR_Guidelines_JP.pdf |
Please note:
You can also find the AUTOSAR Modelling Guide from the TargetLink user documentation in your local installed help via the tl_online_help command and then in the navigation pane at the left hand side.
| Date | 2020-12-17 |
| 软件类型 | 产品级代码生成软件 |
| 行业热点 | AUTOSAR |
| 产品 | TargetLink |
| 资料信息 | 基础知识和概念 |
| 信息类别 | 启动 |
| dSPACE 版本发布 | 2022-A, 2021-B, 2021-A, 2020-B, 2020-A, 2019-B, 2019-A, 2018-B, 2018-A, 2017-B , 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, 2013-A之前版本 |