This application note describes how the predefined RapidPro configurations can be used during the Rapid Control Prototyping development phase. RapidPro’s predefined configurations cover a wide range of typical signal conditioning and power stage tasks in various application areas.
For example, the configurations for engine control prototyping let you run engines with up to 6 cylinders and all modern sensors and actuators, and the configuration for electric motor control serves as a flexible inverter stage during the prototyping phase of diverse AC electric motors. Each configuration consists of selected RapidPro power and signal conditioning modules installed in the corresponding number of RapidPro units.
A Control Unit is used whenever complex I/O signals need to be captured or generated, or a large number of I/O signals are involved.
With this application note, dSPACE also provides dedicated Simulink® I/O startup models for the configurations which include all available I/O signals and suitable ConfigurationDesk experiments.
To verify correct system behaviour, dedicated RapidPro system configurations were built up and tested with a counterpart Hardware-In-The-Loop System. This also included generation and testing of new routing files (see corresponding Routing ID) which represent the specific setup of RapidPro units and modules.
The example configurations were created and tested using MATLAB R2007b+ (Simulink 7.0.1) and dSPACE Release 6.6.
Revision 2011-05-06
Date | 2011-06-05 |
产品类型 | 紧凑型系统 |
产品 | RapidPro |
资料信息 | 应用说明 |
信息类别 | 常规使用 |
dSPACE 版本发布 | 2022-A, 2021-B, 2021-A, 2020-B, 2020-A, 2019-B, 2019-A, 2018-B, 2018-A, 2017-B , 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, 2013-A之前版本 |
推动创新进程。我们始终在技术开发的最前沿。
欢迎订阅我们简讯,了解我们的专业技术以及产品。希望我们的成功案例能够对您有所帮助。快速了解仿真和验证的最新信息。欢迎订阅/管理dSPACE简讯和dSPACE航空速报。