RCP and HIL software | MATLAB R2014a | MATLAB R2014b | MATLAB R2015a | MATLAB R2015a SP1 | MATLAB R2015b |
---|---|---|---|---|---|
Release 2017-A | - | - | - | - | 64-bit |
Release 2016-B | - | - | - | 64-bit | 64-bit |
Release 2016-A | - | 64-bit | - | 64-bit | 64-bit |
Release 2015-B | 32-bit / 64-bit | 32-bit / 64-bit | 64-bit | 64-bit 4) | 64-bit 3) |
Release 2015-A | 32-bit 3) / 64-bit |
32-bit 3) / 64-bit |
64-bit 3) | 64-bit 6) | - |
Release 2014-B | 32-bit / 64-bit 1) | 32-bit / 64-bit 1) | - | - | - |
Release 2014-A | 32-bit / 64-bit 1)2) | - | - | - | - |
TargetLink Version | MATLAB R2014a | MATLAB R2014b | MATLAB R2015a | MATLAB R2015a SP1 | MATLAB R2015b |
---|---|---|---|---|---|
4.2 | - | - | - | 64-bit | 64-bit |
4.1 | 32-bit / 64-bit | 32-bit / 64-bit | 64-bit | 64-bit 5) | 64-bit |
4.0 | 32-bit / 64-bit | 32-bit / 64-bit | - | - | - |
VEOS Version | MATLAB R2014a | MATLAB R2014b | MATLAB R2015a | MATLAB R2015a SP1 | MATLAB R2015b |
---|---|---|---|---|---|
4.0 | - | - | - | - | see note 7) |
3.7 | - | - | - | see note 7) | see note 7) |
3.6 | - | See note 7) | - | See note 7) | See note 7) |
3.5 | See note 7) | See note 7) | See note 7) | See note 7) | See note 7) |
3.4 | 32-bit / 64-bit | 32-bit / 64-bit | 64-bit | - | - |
3.3 | 32-bit / 64-bit | 32-bit / 64-bit | - | - | - |
3.2 | 32-bit / 64-bit 2) | - | - | - | - |
1) 64-bit versions are not supported by all RCP and HIL products. For details refer to MATLAB 64-bit Compatibility.
2) Subsequently tested and qualified. See details
3) No or limited support of RTI FPGA Programming Blockset in this product combination. For details see http://www.dspace.com/faq?295
4) Requires Release 2015-B Implementation Software Service Pack 1, or newer, and ASM 8.1 Patch 1, or newer. After installation, MATLAB R2015a without SP1 will not be supported anymore.
5) Subsequently tested and qualified. When connecting in Installation Manager, a warning message is displayed. This can be ignored.
6) Requires Release 2015-A Implementation Software Service Pack 2, or newer, and ASM 8.0 Patch 2, or newer. After installation, MATLAB R2015a without SP1 will not be supported anymore.
7) As of VEOS 3.5 the dsoffsim target ist not available anymore. The DSRT target ist used instead. Since DSRT is installed with RCP and HIL software, the compatibility between RCP and HIL software and MATLAB is relevant.
Date | 2017-05-23 |
소프트웨어 타입 | Simulation Models, Production Code Generation Software, Implementation Software, Experiment and Visualization Software, Test Automation Software, Simulation Software |
제품군 | ASM (Automotive Simulation Models), ConfigurationDesk, ModelDesk, RCP and HIL Software, RTI (Real-Time Interface), Real-Time Testing, TargetLink |
인포메이션 타입 | 참고정보 |
인포메이션 카테고리 | Versions and Compatibility |
dSPACE Release | 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A |
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.