End-of-life Announcement Calibration Hub

The end of life of Calibration Hub is planned for 2021.

End-of-Life Information

The end of life of the Calibration Hub is planned for December 2021. We advise against using the Calibration Hub in new projects. You can still buy the product until December 2018. New releases of dSPACE software are guaranteed to continue supporting the Calibration Hub until at least the end of 2020.  

Services Until / Date Last Release
End of life announced November 2017  
Product can be purchased December 2018  
New revisions provided December 2018  
Repair service provided December 2020  
Software support provided December 2020 Release 2020-B
Bug-fixes for supporting software December 2020  
Customer support services provided December 2021  

Successor

For new projects we recommend that you use the successor, the DCI-CAN2.
The DCI-CAN2 is more than just a suitable replacement. With the DCI-CAN2 you can access not only the data stream on CAN networks, but also on CAN FD networks. The interface transfers messages between the CAN/CAN FD network and the host PC via the universal serial bus (USB). Compared with the classic CAN protocol, CAN FD (FD = Flexible Data Rate) comes with increased data rates and payload data length. With CAN FD, a multiplied data rate allows an average data transmission speed of several Mbit/s and payload lengths of up to 64 bytes (compared to 8 bytes in a classic CAN).

If you have any questions or need further information, your contact in the dSPACE sales team will be glad to help. 

Migration Information

Dedicated migration information would be published here.

Tags

Date 2017-10-30
제품군 Calibration Hub
인포메이션 타입 알림
인포메이션 카테고리 Discontinuation
dSPACE Release Upcoming Releases

Contact Information

  • Sales
    Sales

    Our Technical Sales staff will assist you in choosing your dSPACE system. They will also provide you with quotations and information about other dSPACE products.

혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.

저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.