Firmware Manager

dSPACE Firmware Manager can be used with the following dSPACE platforms:

• DS1006, DS1007
• SCALEXIO (since Release 2015-B)
• MicroAutoBox II and MicroAutoBox III
• MicroLabBox
• MicroLabBox II
• DS1104

dSPACE Firmware Manager cannot be used for

• RapidPro
• Hardware for dSPACE Solutions

Generally also ControlDesk or ConfigurationDesk can be used for basic firmware management.

Latest Version

For use under  Windows 10/11 64-bit 
 

Firmware Manager 23.2: Download
 
Unzip the package before installation and execute the setup program Install_FirmwareManager.exe.
 

Older Versions

For use under  Windows 10 64-bit

Firmware Manager 3.5: Download

​​​​​​​

For use under Windows 7 64-bit SP1

Firmware Manager 3.0 from Release 2019-B: Download

​​​​​​​For use under Windows 7 32-bit SP1

Firmware Manager 2.3 from dSPACE Release 2017-A: Download
dSPACERequiredRedistributables2.3.exe for Firmware Manager 2.3: Download

For use under Windows 7 32-bit

Firmware Manager 2.1 from dSPACE Release 2016-A: Download
dSPACERequiredRedistributables2.1.exe for Firmware Manager 2.1: Download

For use under Windows XP

Firmware Manager 1.1 from dSPACE Release 2014-A: Download
dSPACERequiredRedistributables.exe for Firmware Manager 1.1: Download
Note: Firmware Manager 1.1 does not support MicroLabBox nor SCALEXIO.

For use with DS1005, DS1103, MicroAutoBox 1st generation

These hardware platforms are not supported anymore. You can still use the Firmware Manager that is installed with the Release you using. We do not provide updated versions.