ControlDesk provides firmware update and restore capabilities. After registering your hardware, open the Platforms/Devices tab, right-click your hardware, select Update Firmware from the context menu, and follow the dialogue.
SCALEXIO and MicroAutoBox III can also be updated and restored with ConfigurationDesk.
Alternatively, you can use Firmware Manager to update or restore the firmware of your dSPACE hardware.
Stand-alone and license-free tool for updating and restoring the firmware of dSPACE hardware. Does not support Solution-specific hardware nor RapidPro.Firmware Archives
For use with Firmware Manager, ControlDesk, or ConfigurationDesk. Does not contain RapidPro nor Solution-specific firmware.
Firmware Manager and Firmware Archives
Since dSPACE Release 2013-B the stand-alone Firmware Manager is available.
The Firmware Manager and the Firmware Archives can also be used with earlier Releases beginning with Release 7.0.
The Firmware Manager does not support RapidPro and dSPACE Solutions.
Since Release 2015-B SCALEXIO Firmware can also be managed with the Firmware Manager.
The Firmware Archives comprise also the latest FPGA Update for the DS1006 multi-core board.
Firmware Updates for Releases before Release 7.0
The Firmware Manager cannot be used with Releases before Release 7.0.
Firmware updates must be done with ControlDesk.
The firmware files were always installed with the basic software (RTLib).
Firmware patches are distributed with RTLib patches, or Implementation Software Service Packs.
Firmware for DS1006 boards in combination with Releases not supporting the DS1006 Multi Core board
When using a DS1006 board with an older Release not supporting the DS1006 Multi Core board, the boot firmware must be downgraded.
Subscribe to our newsletters, or manage or delete your subscriptions