The DS2671 is used in SCALEXIO hardware-in-the-loop simulators. With its freely configurable channels, the DS2671 can serve different bus systems for one ECU.
The DS2671 Bus Board is the interface between a SCALEXIO system and various bus systems. It has 4 multifunctional channels, each of which can support a bus system that is assigned to it by software.
The DS2671 offers 4 software-configurable channels that can be used flexibly for different bus systems. If additional bus systems and protocols are needed, they can be added on request.
Each channel on the DS2671 has the circuit parts for supporting various bus systems, comprising an FPGA for the core and assorted transceivers. The bus system controllers, which include certified IP cores such as the Bosch E-Ray controller for FlexRay, are implemented on the bus FPGA. To use a bus system or protocol that is not yet standardly supported, you can install the necessary transceiver in the channel's piggyback slot.
The following buses and protocols are supported:
A different bus system can be used on each of the 4 channels on the DS2671.
Parameters | Specification |
---|---|
General |
|
Fault simulation |
|
Supported protocols/bus systems |
|
Internal communication interface |
|
Physical size |
|
Voltage supply |
|
Typical power consumption |
|
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.