The DCI-KLine1 (dSPACE calibration interface-KLine1), makes it possible to connect an ECU with implemented diagnostic protocol based on K-Line to your ControlDesk PC for ECU diagnostics and ECU flash programming purposes. The DCI-KLine1 forwards the messages and data from and to the host PC.
The DCI-KLine1 is used with ControlDesk to access electronic control units via KWP2000 on K-Line (ISO 14230). It supports ECUs providing single-wire K-Line communication and a fast initialization wake-up pattern (WuP). You can perform ECU diagnostics and ECU flash programming via the DCI-KLine1.
The DCI-KLine1 comes in the same reliable, robust and compact casing as the DCI-CAN1. Plug & play capabilities via USB provide a quick connection to the host PC. The DCI-KLine1 can be used for ECU diagnostics in passenger cars and commercial vehicles with 12 V and 24 V power supply networks. The integrated optoisolation of the DCI-KLine1 avoids ground loops.
Parameter | Specification | |
---|---|---|
General |
|
|
Host Interface |
|
|
Software configuration |
|
|
Physical characteristics | Enclosure |
|
Connectors |
|
|
Status LED |
|
|
Physical size |
|
|
Approx. weight |
|
|
Temperature range |
|
|
Electrical characteristics | Power supply |
|
Power consumption |
|
|
Galvanic isolation |
|
1) The lower limit is determined by the USB-to-serial converter. The upper limit is determined by the driver circuit and capacitance of K-Line.
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.