USB to LIN/CAN/CAN FD Converter DCI-CAN/LIN1

Robust and compact USB to LIN/CAN/CAN FD gateway

With the DCI-CAN/LIN1 converter you can connect a host PC via USB to CAN/CAN FD and LIN networks.

Application Areas

The DCI-CAN/LIN1 converter connects a host PC to CAN/ CAN FD and LIN networks via USB. It can be used for the measurement of ECU internal variables, ECU calibration, diagnostics and ECU flash programming, and for monitoring the data stream on the CAN and LIN bus in the experiment software ControlDesk. Custom applications can be implemented using the dSPACE CAN API. 

Key Benefits

The DCI‑CAN/LIN1 offers two 9-pin, male Sub-D connectors for connecting two field buses. Up to four field buses can be connected via appropriate adapter cables (2 x CAN/CAN FD, 2 x LIN). The DCI-CAN/LIN1 features an integrated galvanic isolation of the CAN and LIN channels. 

Parameter Specification
General CAN  
  • CAN FD 1.0 (compatible with CAN 2.0 A/B)
  • Transmission standards: CAN FD (ISO 11898-2)
  • Bit rates: 25 kbit/s ... 1 Mbit/s (CAN); 25 kbit/s ... 8 Mbit/s1) (CAN FD)
  • Time stamp resolution: 1 µs
  • NXP CAN transceiver TJA1044GT 
  LIN
  • LIN specification 2.1
  • Bit rates: 1 ... 20 kbit/s
  • Time stamp resolution: 1 µs
  • Transceiver: NXP TJA1021/20 
Host interface
  • USB 2.0 (compatible with USB 1.1 and USB 3.0) 
Software configuration
  • Via ControlDesk or with dSPACE CAN API 2.0 (compatible with CAN API 1.0)
Physical characteristics Enclosure Aluminum box

Connectors

  • Two 9-pin, male Sub-D connectors for connection to CAN and LIN
  • A-type USB connector with 1.5 m (59.0 in) cable for connection to the host PC
Physical size
  • 24 x 71.5 x 114 mm (0,94 x 2.81 x 4.49 in)
Approx. weight
  • Approx. 220 g (0.49 lb.)

Temperature range

  • -40 ... 85 °C (-40 ... 185 °F) ambient temperature
  • -40 ... 100 °C (-40 ... 212 °F) storage temperature
Relative humidity
  • 15 ... 90%, not condensing
IP protection class
  • IP 20
Electromagnetic compatibility
  • EN 55024: 2011-09
  • EN 55022: 2011-12
  • EC directive 2014/30/EU
Electrical characteristics Power supply
  • Via USB: +5 V DC, max. 200 mA
  • Via pin 9 of the Sub-D connectors: 8 ... 18 V DC. The voltage is required for LIN operation.  
  Supplying external devices
  • Via pin 1 of the Sub-D connector: +5V DC; <50 mA 
  Termination
  • No termination of the CAN connector
  Galvanic isolation
  • CAN: Up to 500 V against USB and LIN. Each CAN connection is isolated separately.
  • LIN: Up to 500 V against USB and CAN. Both LIN connections have a common ground. The LIN connections are not galvanically isolated against each other. 
1)The possible transmission rate depends on the environment (cable harness, topology and interferences).

  • USB to LIN/CAN/CAN FD Converter DCI-CAN/LIN1 Product Information, PDF, English, 345 KB
More Information Contact Information

혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.

저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.