In addition to MATLAB and Simulink, MathWorks offers a wide range of blocksets and toolboxes which are extensions to the basic MATLAB and Simulink software packages.
Blocksets and toolboxes provide additional Simulink blocks. To be used with ConfigurationDesk or RTI, these blocks must support code generation with Simulink Coder / Real-Time Workshop.
Note: Only known compatibility issues specific to ConfigurationDesk / RTI are listed in this document. For detailed information on which blocks do or do not support code generation with Simulink Coder / Real-Time Workshop, refer to the MATLAB help or contact MathWorks.
We test the compatibility of blocksets and toolboxes that provide Simulink blocks with selected demo models taken from the MATLAB installation or with our own test models designed especially for this purpose. These tests do not cover the complete functionality range of the blocksets. The complexity resulting from the number of blocks and their possible parameterizations is far too large to guarantee tests with 100% coverage.
Note: As a result, problems might occur even when we state that a certain blockset or toolbox is supported by ConfigurationDesk / RTI. For information on the known problems, see the blockset- or toolboxspecific chapters below or contact firstname.lastname@example.org.
Updated December 1, 2014
Updated February 6, 2015
For full support of Mathworks R2014a it is required to install dSPACE Implementation Software Service Pack 2 for RCP and HIL Software Release 2014-A
Updated February 5, 2014
Updated April 30, 2013
Updated November 20, 2012
Update June 22, 2012 for Release 7.3
Update October 13, 2011 for Release 7.2
Update September 19, 2011 for Release 7.1
Update October 08, 2010 for Release 7.0
|製品||ConfigurationDesk, RTI (Real-Time Interface)|
|dSPACE Release||2019-B, 2019-A, 2018-B, 2018-A, 2017-B , 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, 2012-B以前|