The tables below show which dSPACE products can generally be used with 64-bit MATLAB Releases. To find out which MATLAB Releases are supported exactly, refer to the MATLAB Compatibility Tables.
dSPACE Tool | dSPACE Release 7.2, 7.3, 7.4 |
dSPACE Release 2013-A |
dSPACE Release 2013-B |
dSPACE Release 2014-A |
dSPACE Release 2014-B |
dSPACE Release 2015-A |
dSPACE Release 2015-B |
---|---|---|---|---|---|---|---|
ASM | - | yes | yes | yes | yes | yes | yes |
AutomationDesk (Matlab Access Library) | - | - | - | yes 1) | yes 1) | yes | yes |
ConfigurationDesk | - | yes | yes | yes | yes | yes | yes |
ModelDesk | - | yes | yes | yes | yes | yes | yes |
MotionDesk | - | yes | yes | yes | yes | yes | yes |
TargetLink | yes | yes | yes | yes | yes | yes | yes |
VEOS | - | - | yes | yes | yes | yes | yes |
RTI and RTI Blocksets | dSPACE Release 7.2, 7.3, 7.4 |
dSPACE Release 2013-A |
dSPACE Release 2013-B |
dSPACE Release 2014-A |
dSPACE Release 2014-B |
dSPACE Release 2015-A |
dSPACE Release 2015-B |
---|---|---|---|---|---|---|---|
RTI | - | yes | yes | yes | yes | yes | yes |
RTI-MP | - | yes | yes | yes | yes | yes | yes |
RTI CAN Blockset | - | yes | yes | yes | yes | yes | yes |
RTI CAN MultiMessage Blockset | - | yes | yes | yes | yes | yes | yes |
RTI LIN MultiMessage Blockset | - | yes | yes | yes | yes | yes | yes |
RTI FlexRay Configuration Blockset | - | yes | yes | yes | yes | yes | yes |
RTI FPGA Blockset (support started for Matlab R2012b) | - | yes | yes | yes | yes | yes | yes |
RTI RapidPro Control Unit Blockset (RTIRPCU) | - | - | yes | yes | yes | yes | yes |
RTI Ethernet (UDP) Blockset | - | - | yes | yes | yes | yes | yes |
RTI XCP on Ethernet Blockset | - | - | yes | yes | yes | yes | yes |
RTI AUTOSAR Package | - | - | - | - | disc.5) | disc.5) | disc.5) |
RTI AUTOSAR Blockset | - | - | - | - | yes | yes | yes |
RTI Bypass Blockset | - | - | yes 7) | yes 6) | yes | yes | yes |
Platform API package | dSPACE Release 7.2, 7.3, 7.4 |
dSPACE Release 2013-A |
dSPACE Release 2013-B |
dSPACE Release 2014-A |
dSPACE Release 2014-B |
dSPACE Release 2015-A |
dSPACE Release 2015-B |
---|---|---|---|---|---|---|---|
HIL API MAPort implemented in .NET 2) | - | - | - | - | - | - | - |
XIL API MAPort implemented in .NET | - | - | - | - | - | yes | yes |
Matlablib2 | - | - | - | yes 3) | yes 3) | yes | yes |
MLIB/ MTRACE | - | - | - | disc.4) | disc.4) | disc.4) | disc.4) |
Footnotes | |
---|---|
1 | AutomationDesk MATLAB Access Library supports the remote access to 64-bit MATLAB releases starting with dSPACE Release 2014-A. However the same MATLAB release must also be installed as 32-bit version. If the MATLAB Access Library is not required, AutomationDesk can also be installed and used without MATLAB 64-bit support. |
2 | HIL API.NET cannot be used in 64-bit MATLAB releases. Because there are no further dependencies to MATLAB, it is possible to use it outside of MATLAB. |
3 | matlablib2 supports the remote access to 64-bit MATLAB releases. However the same MATLAB release must also be installed as 32-bit version. |
4 | MLIB/MTRACE last time available in dSPACE Release 2013-B. |
5 | RTI AUTOSAR Package last time available in dSPACE Release 2014-A. |
6 | It is necessary to install Service Pack 2 and RTI Bypass 3.2 Patch 2. Patch Setup does not ask for license files. But you will need the proper RTI Bypass license before you can use the blockset. If in any doubt, use Installation Manager to check for the license and add it if missing. |
7 | Introduced with Release 2013-B Implementation-Software Service Pack 3. |
Date | 2016-06-09 |
ソフトウェアタイプ | シミュレーションモデル, 量産コード生成, 実装, 試験およびビジュアル化, テストオートメーション, シミュレーション |
製品 | ASM (Automotive Simulation Models), AutomationDesk, ConfigurationDesk, ModelDesk, MotionDesk, Platform API Package, RCP and HIL Software, RTI (Real-Time Interface), TargetLink, VEOS |
インフォメーション | 参考情報 |
情報カテゴリー | バージョン/互換性 |
dSPACE Release | 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, 2012-B以前 |
最新の技術開発動向をつかんで、イノベーションを加速。
メールマガジンの購読希望・変更/配信停止手続き