ASM 23.1 Patch 1 for RLS 2023-A                           August 2025
Last-Minute Information
======================================================================
Copyright 2025 dSPACE GmbH, Germany

Contents:

1. General
2. Problems fixed by this Patch
3. Limitations and Workaround
4. Installing the Patch

======================================================================

1. General
----------------------------------------------------------------------
This patch can be installed only after the installation of
dSPACE Release 2023-A.



2. Problems fixed by this Patch
----------------------------------------------------------------------
Fixes included with patch 1:
1406357 ASM Traffic, OSI GroundTruth Interface: Fixed wrong assignement of osi centerlines to osi lanes.
964849  ASM_Battery: Fixed the occurrence of crashes if the number of cells is parameterized greater than the maximum of 500.
971764  ASM_Battery: Fixed the problem of simulating with negative capacity delta parameterization.
973733  ASM_Battery: Fixed a battery state sign error to switch between charge and discharge.
945247  ModelDesk: Fixed a migration value for the ASM_FuelCell humidifier bypass switch.

The patch fixes the problems described above.



3. Limitations and Workaround
----------------------------------------------------------------------
None



4. Installing the Patch
----------------------------------------------------------------------
To install the patch, you must be logged on with administrator rights.


To install this patch, simply run "DS_ASM_23.1.1_945258.exe".
The setup will automatically locate and patch the related dSPACE 
installation.
Run dSPACE Installation Manager after the installation to decrypt 
patch related parts.



   NOTE: You need to close any dSPACE software and
         MATLAB before invoking the installation.


----------------------------------------------------------------------
End of File