DS6202 Digital I/O Board

SCALEXIO I/O board for generating and capturing digital signals

With its precise digital I/O channels and its comprehensive I/O functions the DS6202 Digital I/O Board is ideally suited for various application areas, such as renewable energy, electric drives control, robotics, vehicle engineering, and mechanical test benches. It captures digital signals for measuring parameters, such as position, frequency, and phase and generates digital signal patterns to control actuators or to simulate sensors.

Technical Details

Parameter	Specification
General	32 ground-based digital I/O channels Channels can be configured in pairs to full-differential inputs 8 ns time resolution ± 60 V overvoltage protection 50-pin Sub-D connector
Input (differential mode)¹⁾ (Digital In/Out 5)
Voltage range	RS-485 levels
Baud rate	Max. 20 MBd
Input resistance	266 kΩ
Input (ground-based mode) (Digital In/Out 5)
Voltage range	0 ... 30 V
Threshold voltage	0 ... 12 V
Pulse width	Min. 25 ns
Input resistance	120 kΩ
Output (Digital In/Out 5)
Voltage range	3.3 V TTL 5 V TTL/CMOS
Output modes	High-side switch Low-side switch Push/Pull
Output current	± 40 mA
Output pulse width	Min. 25 ns
Sensor supply	2 x 5 V (max 500 mA each) 1x 12 V (max 125 mA)
Internal communication interface	IOCNET
Physical size	238 x 100 x 19 mm (9.4 x 3.9 x 0.7 in) without fastening bracket Requires 1 slot
Voltage supply	24 V
Typical power consumption	15 W

¹⁾ To use the differential input mode, two channels are required.

User Documentation (Logon required)
User Documentation: DS6202 Digital I/O Board

詳細

興味をお持ちの方は是非ご連絡ください：

お問い合わせ先