PS-DINJ 2/1 Patch 1 for Release 5.2 and Release 5.3

Introduction
Problems Fixed by This Patch
Limitations
Installation Notes & Download

Introduction

This patch can be installed on an existing Release 5.2 or 5.3 installation.

Problems Fixed by This Patch

  • Problem Report KPR.2007.03.05.001
    The Pick-up output pulse generated by the Injection/Ignition block might be too long. The Pick-up signal might be held at high level until the end of the Hold pulse.
    For details see
    http://www.dspace.com/goto?pr_sfc
  • Compatibility with PIC firmware 1.4
    This patch must be installed in order to ensure compatibility between the RPCU_DIAGNOSIS block from the RTIRPCU simulink blockset and PS-DINJ 2/1 modules with module PIC firmware 1.4 or later.
  • Additional changes
    The following output port designators of the RPCU_DIAGNOSIS block for the PS-DINJ 2/1 module have been changed while the meaning of these output ports remains unchanged.
  • "TA signal timeout" -> "Timeout during peak phase"
  • "TB signal timeout" -> "Timeout during hold phase"

Limitations

After installation, models using the RPCU_INJ_IGN_TPU block must be rebuilt. In addition, before starting the build process, the build directory of the model must be deleted.

Installation Notes & Download

ReadMe (2 KB)
RLS_5.2_5.3_RTI_INJIGNp1.exe (1.51 MB)

Tags
Date 2007-08-13
Type de produit Systèmes compacts
Produit RapidPro
Type d’information Patches
Catégorie d’information Phase de débogage
Release dSPACE Avant la 2013-A

Faire avancer l'innovation. Toujours à la pointe de l'évolution technologique.

S’abonner à nos newsletters, gérer ses abonnements ou se désabonner. La newsletter mensuelle contenant toutes les informations liées à l’aéronautique et défense.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.