The DS2601 is used in SCALEXIO hardware-in-the-loop simulators. It provides current and voltage measurement during HIL tests of ECUs. The DS2601 can be equipped with onboard loads or external loads via a second connector.
The DS2601 has 10 input channels to measure the current and voltage.
The DS2601 Signal Measurement Board measures ECU output signals and passes the measurement values to the real-time processor. Signal measurement can be time-triggered or event-triggered, and the execution of signal measurement can be voltage- or current-triggered.
The DS2601 offers 10 versatile, software-configurable channels that can be used as analog or digital input for measuring voltage and current. The channels can be connected in parallel to increase the current-carrying capacity up to 80 A (RMS).
The board also includes an onboard failure routing unit.
The DS2601's input channels can connect analog as well as digital measurement units (analog-digital converters or comparators, respectively) to measure the current and voltage. For example, the measurement units can be combined to trigger analog current measurement if a specified voltage is exceeded. The channels are defined and configured in the ConfigurationDesk software.
The 10 channels on the DS2601 can be connected in parallel. This channel bundling increases the current-carrying capacity up to 80 A (RMS). ConfigurationDesk displays the bundled channels as one single I/O function. The DS2601 supports the use of loads for the ECU. You can either plug substitute loads onto the board itself or connect real loads via a cable harness to the externally accessible load connector.
|Signal measurement (Flexible In 1)||
|Internal communication interface||
|Typical power consumption||
Faire avancer l'innovation. Toujours à la pointe de l'évolution technologique.
S’abonner à nos newsletters, gérer ses abonnements ou se désabonner. La newsletter mensuelle contenant toutes les informations liées à l’aéronautique et défense.