DS6344 CAN Board

SCALEXIO I/O board with 4 CAN channels providing SIC support for connecting simulators to CAN bus systems

La DS6344 CAN Board est l’interface entre un système SCALEXIO et des systèmes de bus CAN/CAN FD. Un récepteur supplémentaire fournit le support de la technologie SIC (capacité d'amélioration des signaux) qui permet une communication stable même à des débits de données élevés.

La carte fournit quatre voies pour les applications RCP et HIL. Les fonctions de gestion de réseau telles que les fonctions de réveil et de mise en veille sont également comprises sous forme de contrôleur disposant d’une résistance de terminaison activable ou non par logiciel.

Technical Details 

Parameter

Specification

Communication interface (internal)

IOCNET (up to 2.5 Gbit/s link speed)

Provided channel types

4 × CAN 8

Galvanic isolation

No

I/O connector

50-pin Sub-D

Typical power consumption

5 W (typ. 0.21 A, at +24 V)

Physical size

  • 238 × 100 × 19 mm (without fastening bracket)

  • Requires 1 slot

CAN 8 Channel Type

The CAN 8 channel type allows CAN/CAN FD communication via a CAN bus according to ISO 11898, ISO 11898-2:2016, ISO 11898-3, and CAN SIC communication according to CiA 601‑4.

Parameter

Specification

Buses

Support of the following buses:

  • High-speed CAN (ISO 11898-2:2016)
  • Fault-tolerant CAN (ISO 11898-2:2016 and ISO 11898-3)
  • CAN SIC (CAN signal improvement capability, CiA 601‑4)
  • Wake-up detection (ISO 11898-2:2016)
  • Partial networking (supported only for ISO 11898-2 high-speed CAN transeiver)

Transceiver1) High-speed CAN
  • NXP TJA1145T/FD high-speed CAN
  • CAN FD-capable CAN controller
  • 15 kbit/s … 1 Mbit/s
  • Data rate for CAN FD: 15 kbit/s ... 2 Mbit/s

Transceiver1) Fault-tolerant CAN
  • NXP TJA1055 fault-tolerant CAN
  • 40 kbit/s … 125 kbit/s

Transceiver1) CAN SIC
  • NXP TJA1463AT
  • CAN FD (CAN flexible data rate) and CAN SIC (CAN signal improvement capability)
  • 15 kbit/s … 1 Mbit/s
  • Data rate for CAN FD: 15 kbit/s ... 8 Mbit/s

Transceiver1) Protected voltage range
  • -58 V … +58 V for the high-speed CAN transceiver TJA1145
  • ‑36 V … +40 V for the fault-tolerant CAN transceiver TJA1055
  • ‑36 V … +40 V for the CAN SIC transceiver TJA1463

Termination High-speed CAN

120 Ω (parallel termination between CAN High and CAN Low, software-configurable)

Termination Fault-tolerant CAN

560 Ω or 5.6 kΩ (software-configurable)

Termination Overcurrent protection

100 mA

Failure routing unit (FRU)

No

1) The specifications of the mounted transceiver might be different. dSPACE might change the transceiver used without notice. This change does not affect the board revision number.

Restez informé grâce à notre service de newsletter dSPACE direct.

Grâce à notre service de newsletter dSPACE, nous vous tiendrons informé des cas d'utilisation actuels, des nouvelles solutions et des nouveaux produits, ainsi que des formations et des événements. Inscrivez-vous ici pour un abonnement gratuit.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.