DS6321 UART Board

SCALEXIO I/O board for connecting simulators to external devices with serial interfaces

The DS6321 UART Board provides four independent channels, each of which can be individually configured. The board is well suited for both rapid control prototyping (RCP) and hardware-in-the-loop (HIL) applications and can be configured directly from ConfigurationDesk. 

Technical Details

Parameter Specification
General
  • 4 independent serial communication channels, each with a 16550-compatible UART (universal asynchronous receiver/transmitter)
  • Supported protocols: RS232-C, RS422, RS485, K-Line
  • Each channel supports RTS/CTS
  • 50-pin Sub-D connector
Interrupts
  • RX-, TX-FIFO-empty-, LSR-, and MSR-interrupts
Baud rate range: RS232
  • Up to 1 Mbit/s
Baud rate range: RS422
  • Up to 10 Mbit/s
Baud rate range: RS485
  • Up to 10 Mbit/s
Baud rate range: K-Line
  • Up to 19.2 kbit/s
Parity bits
  • Even, odd, or no parity
Stop bits
  • 1, 1.5, or 2 bits
Word length
  • 5, 6, 7, or 8 bits
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5 W

 

Cela vous intéresse. Contactez-nous:

Contact

Further Information

Restez informé grâce à notre service de newsletter dSPACE direct.

Grâce à notre service de newsletter dSPACE, nous vous tiendrons informé des cas d'utilisation actuels, des nouvelles solutions et des nouveaux produits, ainsi que des formations et des événements. Inscrivez-vous ici pour un abonnement gratuit.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.