Patch for FPGA Programming Blockset                                December 2025
for RCP HIL 2025-A
********************************************************************************
Copyright 2025, dSPACE GmbH. All rights reserved.
Brand names or product names are trademarks or registered trademarks of their
respective companies or organizations.


Contents:

1.  General
2.  Improvements & Fixed Problems
3.  Limitations
4.  Installing the Patch
5.  Uninstalling the Patch


1. General
********************************************************************************

This Patch can be installed only on an existing product installation of dSPACE
Release 2025-A.

This Patch upgrades the contained products to the following versions:
  - FPGA Programming Blockset 25.1.1

To ensure that the software products updated by this patch work optimally
with your dSPACE real-time hardware such as SCALEXIO or MicroAutoBox III, please
always use the latest Firmware Archives for your systems and keep them up to
date using the Firmware Manager. Available at https://www.dspace.com/go/firmware


2. Improvements & Fixed Problems
********************************************************************************

This Patch fixes the problems listed below.


FPGA Programming Blockset 25.1.1:
---------------------------------

  - Enable the FPGA Build server for Linux
  - Fixed a bug where the generated FPGAC file for Flexible IO was not correct
    for multicore application. (624479)
  - Fixed a problem where the button "Analyze bus topology of input" did not
    work correctly after migration to RLS 24-B or later. (624328)
  - Fixed a problem with Custom Function names containing whitespaces. This is
    not not allowed anymore. (623915)
  - Fixed a problem where the Vivado Demos were delivered without bin file
    generation set in settings. (623909)
  - Fixed a problem where the "Generate" button in Register64 read and write
    blocks with signed datatype did not produce corresponding processor block
	with int64 datatype. (623850)
  - Fixed a problem where the FPGA setup block "Export to ConfigurationDesk"
    requires Model Seperation Setup block in all cases. (623829)
  - Fixed a problem where the dSPACE Help was not able to find the message ID.
    (623782)
  - Resolved an issue encountered during Vitis Model Composer compilation of
    multi-clock subsystems. (623776)
  - Fixed a problem, where the DAC/ADC instrument script, issued a message about
    syntax error in the message log. (623659)
  - Fixed a problem, where the FPGACs XML file for DS1303 contains duplicated
    items when the FPGA model doesn't contain IOs. (623547)
  - Fixed a problem of DDR4 Physical Interface. (623571)


3. Limitations
********************************************************************************

The ControlDesk customer instrument "Scale ADC" is currently only available for
SCALEXIO and MicroAutoBox III, not for MicroLabBox II.


4. Installing the Patch
********************************************************************************

To install the Patch, you must be logged on with administrator rights.
Close all dSPACE applications and run the setup, which will automatically locate
and patch the RCP and HIL Software Installation.


5. Uninstalling the Patch
********************************************************************************

To uninstall this Patch, you must have access to your dSPACE Release
installation DVD.

For uninstalling patches and hot fixes refer to FAQ 158:
http://www.dspace.com/faq?158

********************************************************************************