ASM 24.2 Patch 1 for RLS 2024-B                           May 2026
Last-Minute Information
======================================================================
Copyright 2026 dSPACE GmbH, Germany

Contents:

1. General
2. Problems fixed by this Patch
3. Limitations and Workaround
4. Installing the Patch

======================================================================

1. General
----------------------------------------------------------------------
This patch can be installed only after the installation of
dSPACE Release 2024-B .



2. Problems fixed by this Patch
----------------------------------------------------------------------
Fixes included with patch 1:
1285741 ASM Environment, Maneuver Scheduler: The "Duration Condition" will now trigger the next sequence on the exact same time in every scenario execution.
1285741 ASM Traffic, Traffic Scheduler: The "Duration Condition" will now trigger the next sequence on the exact same time in every scenario execution.
1451933 ASM Environment, Driver: Fixed non-deterministic behavior of blocks LATERAL_CONTROL1 and LATERAL_CONTROL2.
1462064 ASM Environment, Driver: The SPEED_PROFILER off-road handling speed reduction is included in global reset.
1493485 ASM Environment, Driver: The SPEED_PROFILER s-preview points support a negative value range, and are included in global reset.
1504440 ASM Environment, Driver: Fixed multiple SPEED_PROFILER velocity and acceleration calculations under specific boundary conditions.

The patch fixes the problems described above.



3. Limitations and Workaround
----------------------------------------------------------------------
None



4. Installing the Patch
----------------------------------------------------------------------
To install the patch, you must be logged on with administrator rights.


To install this patch, simply run "DS_ASM_24.2.1_1164762.exe".
The setup will automatically locate and patch the related dSPACE 
installation.
Run dSPACE Installation Manager after the installation to decrypt 
patch related parts.



   NOTE: You need to close any dSPACE software and
         MATLAB before invoking the installation.


----------------------------------------------------------------------
End of File