The DS2671 is used in SCALEXIO hardware-in-the-loop simulators. With its freely configurable channels, the DS2671 can serve different bus systems for one ECU.
Each channel on the DS2671 has a bus FPGA, all the standardly supported transceivers for bus systems and protocols, and a piggyback slot for customer-specific transceivers.
The DS2671 Bus Board is the interface between a SCALEXIO system and various bus systems. It has 4 multifunctional channels, each of which can support a bus system that is assigned to it by software.
The DS2671 offers 4 software-configurable channels that can be used flexibly for different bus systems. If additional bus systems and protocols are needed, they can be added on request.
Each channel on the DS2671 has the circuit parts for supporting various bus systems, comprising an FPGA for the core and assorted transceivers. The bus system controllers, which include certified IP cores such as the Bosch E-Ray controller for FlexRay, are implemented on the bus FPGA. To use a bus system or protocol that is not yet standardly supported, you can install the necessary transceiver in the channel's piggyback slot.
The following buses and protocols are supported:
A different bus system can be used on each of the 4 channels on the DS2671.
|Supported protocols/bus systems||
|Internal communication interface||
|Typical power consumption||
Drive innovation forward. Always on the pulse of technology development.
Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.