DS2621 Signal Generation Board

HighFlex board for simulating ECU input signals

The DS2621 is used in SCALEXIO hardware-in-the-loop simulators. It provides signal generation for simulating voltages, currents, resistances, and switches during HIL tests of ECUs. Its current and voltage range can be increased by bundling up to 10 channels.  

Application Area

The DS2621 Signal Generation Board stimulates ECU inputs. It mimics sensors or switches such as door contact switches, Hall sensors, and sensors for wheel speed and oil temperature. Each of the DS2621's 10 channels can be software-configured as a voltage source, a current sink, a digital output simulation or a resistance simulation.

Key Benefits

The DS2621 offers 10 versatile, software-configurable output channels that can be connected in parallel or in series to increase the current or voltage range. The board also includes an onboard failure routing unit.

I/O Functionality

The DS2621 has 10 flexibly configurable output channels to make analog and digital signal generators available. To increase the current or voltage range, up to 10 channels can be bundled in parallel or in series. For example, two voltage sources can be switched in sequence, or two current sinks in parallel, to increase the output voltage or current. The digital output can be used as a switch and can generate time- and frequency-dependent signals (such as PWM). For example, the resistance simulation can be used to pass the specified temperature changes to an ECU via the environment model.

Channel bundling is supported by the software. ConfigurationDesk displays the bundled channels as one single I/O function.  

Parameter Specification
  • 10 galvanically isolated channels
  • Up to 10 channels can be connected in sequence or in parallel to increase the current range to max. ±320 mA and the voltage range to max. ±60 V
  • Status LED for overall board status
Signal generation (Flexible Out 1)
  • Voltage source
    • Output voltage ±20 V
    • Output current ±40 mA
    • DAC resolution 16 bit
    • Signal frequency 0 … 140 kHz (sine)
  • Current sink
    • Voltage range ±60 V
    • Current range ±40 mA
    • DAC resolution 15 bit
    • Signal frequency 0 ... 140 kHz (sine)
  • Resistance simulation
    • Resistance range 17.5 Ω ... 1 MΩ
    • Voltage range ±20 V
    • Current range ±40 mA
  • Digital output
    • Voltage range ±60 V
    • Current range ±40 mA
    • Signal frequency 0 ... 1 MHz
Fault simulation
  • Onboard failure routing unit (FRU)
  • Signal forwarding to central FIU
  • Relay-based
  • Available for each channel
Electronic fuses
  • 100 mA RMS ECU (effective value)
  • On ECU side tripping at I = 100 mA
  • On sensor side with configurable trip range I = 5 ... 40 mA
Internal communication interface
Physical size
  • 410 x 100 x 15 mm (16.1 x 3.9 x 0.6 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 31.2 W

  • SCALEXIO Product Information, PDF, English, 16194 KB
Product Information Support Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.