DS6651 Multi-I/O Module

SCALEXIO FPGA I/O expansion for developing and testing highly dynamic control applications

The DS6651 Multi-I/O Module provides flexible interfaces for different position sensors, voltage measurement and generation as well as multipurpose digital I/O. Its channel set is ideally suited for highly dynamic control applications as well as for the high-fidelity simulation of electric drives and power electronics components.

The DS6651 Multi-I/O Module can be used with all SCALEXIO FPGA boards.

Technical Details 

Parameter Specification
General
  • 6 A/D channels, 6 D/A channels, 16 digital I/O channels
  • 1x 50-pin Sub-D connector
  • ±60 V overvoltage protection
Analog input
  • 6 channels
  • Input voltage ranges selectable for each channel: +/- 1 V, +/- 5 V, +/- 10 V or 60 V
  • ADC resolution: 16 bits
  • Sampling rate: 5 MS/s
  • Selectable load resistor: 220 Ω (for channels 5 and 6 only)
Analog output
  • 6 channels
  • Output voltage range: +/- 10 V
  • DAC resolution: 16 bits
  • Update rate: 10 MS/s
  • Selectable transformer (for channels 5 and 6 only)
Digital I/O
  • 16 ground-based digital I/O channels
    • Channels can be configured in pairs to full differential pairs
  • Time resolution: 8 ns
Digital I/O input (ground-based mode)
  • Maximum input voltage range: 0 ... 30 V
  • Threshold voltage: 0 ... 12 V
  • Input frequency: max. 25 MHz
Digital I/O output (ground-based mode)
  • Voltage range:
    • 3.3 V TTL/CMOS
    • 5 V TTL
  • Output modes:
    • High-side switch (+3.3 V or +5 V)
    • Low-side switch (GND)
    • Push/pull
  • Output frequency: 25 MHz (max. at 50% duty cycle)
Digital I/O RS485
  • Voltage range: RS485 levels
  • Bit rate: max. 16 Mbit/s
Sensor supply
  • 2x 5 V (max. 500 mA each)
Physical size
  • Requires 1 slot
  • 232 x 100 x 19 mm (9.2 x 3.9 x 0.7 in) without fastening bracket
Typical power consumption
  • 6 W

This sounds interesting. Get in touch:

Contact

Further Information

Stay up-to-date with our dSPACE direct newsletter service.

With our dSPACE newsletter service, we will keep you informed about current use cases and new solutions and products, as well as trainings and events. Sign up here for a free subscription.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.