DS5380 Low-Voltage Electronic Load Module (30 V)

PHIL testing of low-voltage and low-power auxiliary motors

The DS5380 Low-Voltage Electronic Load Module is especially designed for power hardware-in-the-loop (PHIL) testing of low-voltage and low-power auxiliary motors, which are controlled by pulse width modulation (PWM).

The DS5380 Low-Voltage Electronic Load Module is especially designed for PHIL testing of low-voltage and low-power auxiliary motors, which are controlled by PWM. These motors are typically used in applications such as electronically controlled automatic transmissions as well as electric fuel and selective catalytic reduction (SCR) pumps. The module can work as both a current sink and current source to provide bidirectional current flow, i.e., it generates or consumes real current on ECU motor outputs.

Key Benefits

The DS5380 Low-Voltage Electronic Load Module has two independent load channels that can control a unipolar current via the module’s power output stage. The two channels can be used as a sink and source device (bidirectional current) or they can be switched in parallel to double the maximum current if a current flow in only one direction is required. This expands the range of applications beyond electric motor simulation.

Parameter Specifications
Voltage
  • Up to 30 V DC
Current (AC)
  • 30 A
Current (DC)
  • 30 A
Power
  • 300 W
Modularity
  • Parallel connection supported
Power supply
  • Internal DC link voltage -5 V … 35 V
Hardware topology
  • Parallel
Power electronics technology
  • Transistors
Resulting switching frequency
  • Linearly controlled
Protection
  • The modules are protected against overload and overtemperature.
Cooling
  • Temperature-controlled fan
HIL interface
  • Analog -10 … 10 V
HIL interface update rate
  • 2 µs

  • Power Hardware-in-the-Loop Testing Product Information, PDF, English, 8510 KB
Product Information Support Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.