When I download a model, the simulation starts straight away, so that it is impossible to capture the behaviour of the model at the simulation start via ControlDesk or ControlDesk Next Generation. Is there any way of starting and stopping the real-time processor manually so that data capture can start at 0.0 time?
Date | 2014-01-01 |
Software Type | Implementation Software, Experiment and Visualization Software, Bus and Network Software, ECU Interface Software |
Product | ControlDesk, RTI (Real-Time Interface) |
Information Type | Frequently Asked Questions |
Information Category | Working with |
dSPACE Release | 2023-A, 2022-B, 2022-A, 2021-B, 2021-A, 2020-B, 2020-A, 2019-B, 2019-A, 2018-B, 2018-A, 2017-B , 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, Prior to 2013-A |
Keywords | Data capture, Model behavior, Simulation start, Time 0.0, SimState, RUN, STOP |
Drive innovation forward. Always on the pulse of technology development.
Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.