dSPACE Release 7.4
(Released in November 2012)

Product Details

ASM 4.1

Dolly extension for ASM Trailer

  • Flexible trailer definition
  • Complete trailer support, road train simulation
  • Demo model for full- and semi-trailer

Subframe compliance in ASM Vehicle Dynamics

  • Elastokinematics of a suspension subframe on the rear axle

Independent steering

  • Independent steering behavior for left and right in all vehicle models
  • ModelDesk support

AutomationDesk 3.6

Test Builder Custom Library

  • Ready to use test framework
  • Based on Framework Builder Library
  • Highly customizable and transparent

VEOS Support1)

  • VEOS Plant Model access via HIL API
  • VEOS virtual ECU access via calibration interface

Miscellaneous

  • Enhanced drag & drop of data objects to Exec blocks
  • ControlDesk NG access read/write on platform
  • Sort data objects by type

ConfigurationDesk 4.3

Implementation Version

  • Architectural changes provide larger test systems
    • Unlimited amount of functions
    • Uniform Undo/Redo functionality
    • All parameters can be edited in table views
    • Centralized view for solving configuration conflicts
  • Support of the new SCALEXIO I/O board (DS2690 Digital I/O Board)

ControlDesk 3.7.4

  • Bugfixes and minor enhancements

Please note: ControlDesk 3.x will be delivered for the last time with dSPACE Release 2013-A.

ControlDesk 4.3

  • Camera interface and video instrument
    • Support of IDS uEye camera (USB, Ethernet)
    • Support of Microsoft DirectShow interface (e.g., USB webcams)
    • Online preview and synchronous recording playback (time cursor)
    • Option to record in separate AVI file
  • Avionics instruments
    • Altimeter
    • Artificial Horizon
    • Heading Indicator
    • Airspeed Indicator
  • Virtual ECU testing with dSPACE VEOS (offline simulation platform based on DSDAQ Offline Platform, Signal Editor for offline simulation)1)
  • Support of ASAM MDF 4.0
  • Support of Vector VN16xx bus interfaces

dSPACE FlexRay Configuration Package 3.0

  • Support of AUTOSAR System Templates (Version 3.2.2) as communication matrix
  • Support of transmission modes (as defined in AUTOSAR 3.1.4 and higher)
  • Support of send conditions (as defined in FIBEX)

ECU Interface Manager 1.2

 

  • Automation interface for integrating bypass services and hooks directly from MATLAB®/Simulink®
  • Deactivation of ECU functions in the original ECU application during run time (i.e., to minimize the influence of internal bypass functions on the ECU's runtime behavior)
  • Deactivation of write accesses to selected ECU variables via a switch logic
  • Option to assign a password to configuration packages

Model Compare 2.3

  • Support of the new MATLAB model file format SLX in addition to the MDL format
  • Permanent colorization of differences
  • Revised display options for Model Navigator
  • Compatibility to latest MATLAB and TargetLink versions

ModelDesk 2.6

 

  • Support of MATLAB 64-bit
  • Support of VEOS1)
  • Trailer support
  • Extended automation interface for variant handling of parameter sets

MotionDesk 3.1

  • Publicly available automation interface
  • Visualization of precipitation like rain or snow
  • Native 3-D fullscreen mode
  • Support of MicroAutoBox II
Real-Time Testing 2.0
  • Support of VEOS (dSPACE offline simulator)1)

RTI Bypass Blockset 2.9.1

  • Improved integration of C functions including associated A2L files in the bypass model
  • Reuse of A2L variables already existing in the ECU code within the internal bypass model
  • Support of A2L/AML version 1.6

RTI CAN Blockset 2.8.1

  • Bugfixes and minor enhancements

RTI CAN MM Blockset 2.7

  • Support of AUTOSAR System Templates (Version 3.2.2) as communication matrix

RTI FPGA Programming Blockset 2.4

  • Easier changing of FPGA frameworks
  • Faster FPGA Interface
  • Direct Verilog support for the Handcode Interface (in addition to VHDL support)
  • Support of ISE 14.1 (32-bit version)
RTI LIN MM Blockset 2.0
  • Support of AUTOSAR System Templates (Version 3.2.2) as communication matrix
  • Support of J2602

RTI RapidPro Control Unit Blockset 2.1

  • Support of any crank/cam technology with fully configurable, map-based setup of the crank/cam wheel geometry
  • Support of crank sensors with rotation detection for hybrid electric vehicles (HEV) and Start/Stop system development
  • Fast, ECU-like engine synchronization

SystemDesk 3.2 / SystemDesk 4.0

SystemDesk 3.2

Support of AUTOSAR Release 3.2, 3.1 and 3.0

V-ECU (virtual ECU) Generation

  • Generation of IoHwAbstraction, BSW Scheduler and improved ECU state manager
  • Definition of RTE intervention points for preparing V-ECUs for test scenarios
  • Generation of the V-ECU implementation
    • Process support for automatic BSW module update and configuration
    • Basis for VPU generation with SystemDesk and thus offline simulation with VEOS

V-ECU Simulation

  • Offline simulation of ECU start up scenarios with VEOS
  • Simulation of different system configurations (define if an ECU is part of the simulated system or not)
  • New stimulation scenarios
    • Manipulation of interrunnable variables and RTE status values
    • Stimulation of an ECU and a bus breakdown
    • Delaying the transmission of bus messages

SystemDesk 4.0 

Support of AUTOSAR release 4.0

Modeling AUTOSAR software and system architectures

  • Complete AUTOSAR 4.0 support
  • AUTOSAR package view
  • Specific dialogs for elements on software component level
  • Generic modeling of all elements according to the structure of the AUTOSAR meta model
  • Several validation opportunities
  • Complete tool automation

AUTOSAR Data Exchange

  • AUTOSAR file assignments
  • Import and export of the AUTOSAR system extract
  • Special roundtrip between SystemDesk and dSPACE TargetLink based on software component containers

TargetLink 3.4

  • New interface concept to improve support of component-based development and incremental code generation
  • Improved code efficiency: e.g., for structures, access functions, AUTOSAR, etc.
  • Data Dictionary diff&merge via synchronized tree views
  • Custom code patterns for arbitrary Simulink blocks
  • Incremental code generation for AUTOSAR Software Components
  • Further AUTOSAR improvements like AUTOSAR Compatibility Mode and update capability for AUTOSAR frame model generation
  • Connection to VEOS (dSPACE offline simulator)

VEOS 3.0

  • Integration and simulation of Simulink® models
  • Simulation of virtual CAN bus communication
  • Software-in-the-loop (SIL) and processor-in-the-loop (PIL) simulation
  • Offline simulation via virtual ECU technology

MATLAB® support

  • R2010b SP2
  • R2011a
  • R2011b
  • R2012a
  • R2012b

Operating system support

  • Windows 7 SP1 (32/64-bit)
  • Windows Vista SP2 (32-bit)
  • Windows XP SP3 (32-bit)

 

1) These new VEOS features will be released with a VEOS add-on in January 2013.

Basic Information More Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.