The DS6805 Fault Insertion Board provides 10 relay‑based fault insertion channels.
The semiconductor switch in combination with the IOCNET 100M technology enables precise simulation of faults, including dynamic errors.
The supported range of up to 60 V and 15 A covers most applications of electronic control units.
It is connected to four internal failrails (VBat, GND, and two common rails), to support failures against VBat, GND, and Pin to Pin.
Technical Details
| Parameter | Specification |
|---|---|
| Provided channel types | 10 relay‑based fault insertion channels with electronic protection |
| Central semiconductor switch | Yes |
| Channel multiplication | Yes |
| Communication interface | IOCNET 100M (100 Mbit/s) |
| Max. switching power | 60 V / 15 A |
| Electrical resistance per channel between ECU and load sidex | Approx. 30 mΩ |
| Typical power consumption | 8 W |
| Physical size | 387 × 130 × 37 mm (with fastening bracket) Requires 1 slot in an FSX Unit. Refer to SCALEXIO FSX Unit. |
| Mass | 1.1 kg |
