DS6336-CS/PE Ethernet Board

Additional Ethernet ports for SCALEXIO systems

The DS6336-CS/PE Ethernet Board is a PCIe x4 board that provides two independent standard Ethernet ports for connecting external devices to a SCALEXIO Processing Hardware. Since each interface supports up to 10 Gbit/s it is ideal for demanding applications requiring a high bandwidth and a low delay.

Technical Details

Parameter	DS6336-CS	DS6336-PE
Supported networks	Standard Ethernet (physical layer)	Standard Ethernet (physical layer)
Controller	Intel® X550 dual-port 10 GbE Ethernet controller	Intel® X550 dual-port 10 GbE Ethernet controller
Supported standards	100BASE‑TX 1000BASE‑T 2.5GBASE-T1) 5GBASE-T1) 10GBASE-T	100BASE‑TX 1000BASE‑T 2.5GBASE-T1) 5GBASE-T1) 10GBASE-T
Data rate	100 Mbit/s (full duplex) 1 Gbit/s (full duplex) 2.5 Gbit/s (full duplex) 5 Gbit/s (full duplex) 10 Gbit/s (full duplex) Autonegotiation	100 Mbit/s (full duplex) 1 Gbit/s (full duplex) 2.5 Gbit/s (full duplex) 5 Gbit/s (full duplex) 10 Gbit/s (full duplex) Autonegotiation
Connectors	2 × 8-pin RJ45	2 × 8-pin RJ45
Board interface	PCIe 3.0 x42)	PCIe 3.0 x42) Operable in x4, x8 and x16 slots
Typical power consumption	12.4 W	11.4 W (typ. 0.95 A, at +12 V)
Physical size	273 x 100 x 20 mm (with fastening bracket)	145 × 120 × 21.6 mm (with bracket)
Slot dependencies	Requires 1 slot with PCIe support in a SCALEXIO AutoBox/LabBox3)	Requires 1 PCIe x4 slot in a SCALEXIO Processing Unit

 

¹⁾ 2.5GBASE-T and 5GBASE-T are also known as NBASE-T.

²⁾ The actual operating speed depends on the installed systems capabilities. The SCALEXIO AutoBox/LabBox currently supports PCIe version 2 only.

³⁾ You can use up to five Ethernet boards (DS6333-CS, DS6335-CS, and/or DS6336-CS) in a SCALEXIO AutoBox/LabBox. It is recommended to use the slots with PCIe x4 support first. When you work at very high data rates and use all controllers. PCIe x1 support might not support full Ethernet speed.