The DCI-KLine1 (dSPACE calibration interface-KLine1), makes it possible to connect an ECU with implemented diagnostic protocol based on K-Line to your ControlDesk PC for ECU diagnostics and ECU flash programming purposes. The DCI-KLine1 forwards the messages and data from and to the host PC.
The DCI-KLine1 is used with ControlDesk to access electronic control units via KWP2000 on K-Line (ISO 14230). It supports ECUs providing single-wire K-Line communication and a fast initialization wake-up pattern (WuP). You can perform ECU diagnostics and ECU flash programming via the DCI-KLine1.
The DCI-KLine1 comes in the same reliable, robust and compact casing as the DCI-CAN1. Plug & play capabilities via USB provide a quick connection to the host PC. The DCI-KLine1 can be used for ECU diagnostics in passenger cars and commercial vehicles with 12 V and 24 V power supply networks. The integrated optoisolation of the DCI-KLine1 avoids ground loops.
Parameter | Specification | |
---|---|---|
General |
|
|
Host Interface |
|
|
Software configuration |
|
|
Physical characteristics | Enclosure |
|
Connectors |
|
|
Status LED |
|
|
Physical size |
|
|
Approx. weight |
|
|
Temperature range |
|
|
Electrical characteristics | Power supply |
|
Power consumption |
|
|
Galvanic isolation |
|
1) The lower limit is determined by the USB-to-serial converter. The upper limit is determined by the driver circuit and capacitance of K-Line.
Drive innovation forward. Always on the pulse of technology development.
Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.