The main task of a BMS is to balance the voltages of each cell in a multicell battery. Furthermore, it continuously monitors the battery’s temperature. For realistic tests of the BMS, at least one cell module has to be integrated into the HIL system. The cell modules measure the cell voltages and provide the connection between the ECU and the battery. The main task of the HIL simulator is to output the cell voltages and temperatures with high precision.
The EV1077 supplies continuously adjustable voltages in the range of 0 to 6 V. With this range, damaged cells can be emulated as well. For example, a voltage higher than the nominal voltage simulates a cell's increased internal resistance during charging. Depending on the battery type and the test focus, several EV1077 Battery Cell Voltage Emulation Boards are combined in the HIL system. For each 32 EV1077s, one EV1082 controller board is needed that controls the cell emulation boards and communicates with the real-time system. Because one EV1077 can emulate 4 battery cells, one controller board controls up to 128 cells.
All live parts of the test system are galvanically isolated, letting you connect the modules in series up to a voltage of 1.000 V. To meet safety regulations, a safety compartment prevents accidental contact with the ECU, protecting you against you harm stemming from high voltages.
To simulate high-voltage batteries that consist of a series of battery cells, the approach in ASM is to connect single cells of an identical design to create a string of cells. This string of cells consists of a reference cell model that describes the basic behavior of the cell type used, and a delta model that computes the deviation of each individual cell voltage from the reference voltage. The capacity, initial charge state, and deviation from the reference value of the internal resistance can be specified for each cell. This is ideal for developing and testing battery management systems (BMS).
Subscribe to our newsletters, or manage or delete your subscriptions