Windows 11 Support of dSPACE Products

General Information

dSPACE supports the 64-bit Professional, Education and Enterprise editions of Windows 11.

Windows 11 Home is not supported.

The information below shows which Windows 11 versions have been used for product tests.

We assume that future Windows updates are downward compatible according to Microsoft's update strategy and do not perform any additional tests with these versions. Should problems occur with newer Windows 11 versions than used for testing the dSPACE products, these will be evaluated on a case-by-case basis.

Windows 11 Enterprise Versions used for Products Tests

Release GAC
2023-B GAC 22H2
2023-A GAC 21H2
2022-B GAC 21H2

Limited support for FPGA Programming Blockset

Valid for the FPGA Programming Blockset:

  • We recommend using Windows 10 when using the FPGA Programming Blockset (FPGA Interface). Vitis Model Composer is not qualified for usage with Windows 11.
  • There are no limitations with regards to the FPGA Programming Blockset (Processor Interface)


Older Releases

Older Releases have not been tested under Windows 11. 

We recommend using Release 2022-B (or newer). 

Date 2024-01-29
Product ASM (Automotive Simulation Models), AutomationDesk, Compilers, ConfigurationDesk, Failure Simulation Package, ModelDesk, MotionDesk, Platform API Package, RTI (Real-Time Interface), Real-Time Testing, SYNECT, SystemDesk, TargetLink, VEOS
Information Type Reference Information
Information Category Versions and Compatibility
dSPACE Release 2023-B, 2023-A, 2022-B

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.