Release 7.4 Implementation-Software Service Pack 3

Introduction

This Service Pack can be installed only on top of an existing RCP and HIL Release 7.4 Installation Set.

These patches are contained in the Service Pack: 

  • ConfigurationDesk Implementation 4.3p3
    • Implementation Version for SCALEXIO  
    • Fixes a serious problem with the Undo function. See ReadMe.
  • ConfigurationDesk 4.3p1
    • Configuration Version for RapidPro
  • DS1006 Compiler 2.2p1
  • Microtec PowerPC C/C++ Compiler Version 3.7.7
  • DSRTSU 1.8p1
  • RTI 6.9.1p1
  • RTIBYPASS 2.9.1p1
  • FlexRay Configuration Tool 3.0p2
  • RTI CAN MultiMessage Blockset 2.7p2
  • RTI Ethernet (UDP) Blockset 1.2p1
  • RTI FPGA Programming Blockset 2.4.1
  • SCALEXIO RTLIB 2.1p3
  • RTLib1005 2.11p2
  • RTLib1006 2.7p2
  • RapidPro Firmware 2.2p1

For a detailed list of the solved problems and improvements refer to the ReadMe file below. 

Limitations

Since ConfigurationDesk 4.3p2 for SCALEXIO

Applications built with ConfigurationDesk 4.3 will change their behaviour on DS2621 high-side and low-side switched digital-out channels.
The user has to check if the high-side and low-side switch function blocks are configured correctly.

Installation Notes & Download

Additional Firmware Updates Required

After the installation of the Service Pack, these firmwares must be updated manually:

  • SCALEXIO with ConfigurationDesk
  • RapidPro with RapidProUpdate.exe

Tags
Date 2013-11-19
Software Type Implementation Software
Product ConfigurationDesk, RTI (Real-Time Interface)
Information Type Patches
Information Category Troubleshooting
dSPACE Release Prior to 2013-A

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.