RTLib Patch 5 for Release 7.0

 

Introduction

This patch can be installed on an existing installation of dSPACE Release 7.0.

New features introduced by this patch

-

Problems fixed by this patch

For a detailed list of fixed problems refer to the ReadMe file below.

Summary:

  • New firmwares for all I/O boards and MicroAutoBox variants with CAN/LIN bus interface
    solving a number of different problems.
  • New firmwares for MicroAutoBox II for
    • the ethernet host interface,
    • USB flight recorder,
    • DS1511 with DIO Type 3 module,
    • DS1512 FPGA.
  • RTLib1401 bugfixes
    • DIO Type 3,
    • ADC Type 4,
    • DS1401 Watchdog.
  • RTLib1005 and RTLib1006
    • DS2211 SENT interface (SAE J2716 SENT2010 standard)

 

After the installation, the MicroAutoBox II firmware must be updated.
Under ControlDesk 3.7 this might happen automatically,
under ControlDesk Next Generation 4.0 the update must be started manually.

 

Limitations

When installing this patch, a valid license for the PowerPC compiler or DS1006 compiler
is required because the RTLib is recompipled on the target PC.
When using a license with WIBU license key, the license key must be connected to the PC.

Installation Notes & Download

 

Tags
Date 2012-12-04
Product Type Compact Systems, Modular Systems
Hardware Type PHS Hardware, Off-the-Shelf Systems
Product DS1006 Processor Board, MicroAutoBox, RCP and HIL Software
Information Type Patches
Information Category Troubleshooting
dSPACE Release Prior to 2013-A
Keywords DS1005 PPC Board

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.