ASM 23.2 Patch 1 for RLS 2023-B                           January 2024
Last-Minute Information
======================================================================
Copyright 2024 dSPACE GmbH, Germany

Contents:

1. General
2. Problems fixed by this Patch
3. Limitations and Workaround
4. Installing the Patch

======================================================================

1. General
----------------------------------------------------------------------
This patch can be installed only after the installation of
dSPACE Release 2023-B.



2. Problems fixed by this Patch
----------------------------------------------------------------------
Fixes included with patch 1:
964849  ASM_Battery: Fixed the occurrence of crashes if the number of cells is parameterized greater than the maximum of 500.
971764  ASM_Battery: Fixed the problem of simulating with negative capacity delta parameterization.
973733  ASM_Battery: Fixed a battery state sign error to switch between charge and discharge.
1007124 ASM_Utils: Fixed problems with missing light library paths and some license drop-down menus of library blocks.

The patch fixes the problems described above.



3. Limitations and Workaround
----------------------------------------------------------------------
None



4. Installing the Patch
----------------------------------------------------------------------
To install the patch, you must be logged on with administrator rights.


To install this patch, simply run "DS_ASM_23.2.1_964911.exe".
The setup will automatically locate and patch the related dSPACE 
installation.
Run dSPACE Installation Manager after the installation to decrypt 
patch related parts.



   NOTE: You need to close any dSPACE software and
         MATLAB before invoking the installation.


----------------------------------------------------------------------
End of File