DS6121 Multi-I/O Board

SCALEXIO I/O board for electric drive and power electronics control applications

With its application-specific I/O library and tailored channel set, the DS6121 Multi-I/O Board is ideally suited for dynamic electric drive and power electronics control applications.

Application Areas

The DS6121 supports a wide range of electric drives from small auxiliary motors to high-performance traction motors in various application areas, such as in-vehicle electrification and electric powertrains as well as industrial automation, e.g., highly dynamic test benches.

Key Benefits

The DS6121 Multi-I/O Board combines flexible interfaces for multiple position sensors, multichannel PWM generation for block and sine commutation, and analog channels for accurate analog measurement on a single board. Onboard I/O synchronization and I/O preprocessing enable highly dynamic control scenarios and provide outstanding real-time performance. A powerful I/O function library with easy access allows for quick prototyping of control applications. Furthermore, several e-drive control demo models are included to get you started. 

Parameter Specification
General
  • 1 x 50-pin Sub-D connector
  • ±60 V overvoltage protection1)
Signal measurement
Analog input
(6x Analog In 16)
  • Input voltage range
    • -10 ... +10 V
    • -60 ... +60 V
  • ADC resolution: 16 bits
  • Sampling rate: 2 MS/s
  • -3 dB cutoff frequency: 3.5 MHz
Signal measurement
Digital input
(4x Digital In/Out 9)
  • Voltage range: 0 ... 60 V
  • Threshold voltage: 0 ... 12 V
  • Pulse width: 25 ns (typ.)
  • Input resistance: 120 kΩ
Signal generation
Digital output
(4x Digital In/Out 9, 12x Digital Out 8)
  • Voltage range
    • 3.3 V TTL
    • 5 V TTL/CMOS
  • Output modes
    • High-side switch
    • Low-side switch
    • Push/Pull
  • Output current: ±40 mA
  • Output pulse width: 25 ns (typ.)
Position sensor interfaces
Position encoder
(6x Flexible In/Out 1)
  • Encoder signal types
    • Sinusoidal signals: 1 VPP or 2 VPP differential
    • Digital signals: RS485
    • Individually configurable for each channel
  • Analog input voltage range
    • ±0.5 V (1 VPP)
    • ±1 V (2 VPP)
  • ADC resolution: 14 bits
  • Sampling rate: 10 MS/s
  • -3 dB cutoff frequency: 3 MHz (typ.)
Position sensor interfaces
Resolver interface
(1x Resolver In 2)
  • Excitation output voltage: 3 VRMS, 7 VRMS, or 10 VRMS
  • Excitation output current: max. 160 mARMS
  • Excitation output frequency range: 2 ... 20 kHz
  • Input voltage range: 1.5 VRMS, 3.5 VRMS, or 5 VRMS
  • Resolution: 10, 12, 14, 16 bits
  • Overvoltage protection: ±12 V continuous
Sensor supply
  • 2x 5 V (max. 500 mA each)
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 19 mm (9.4 x 3.9 x 0.7 in) without fastening bracket
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 12 W
1) Resolver provides a reduced overvoltage protection.

I/O Functionality

The channel set of the DS6121 Multi-I/O Board supports the following I/O functions. The channels are defined and configured graphically with dSPACE ConfigurationDesk.

Position Sensors

  • 3x Sine Encoder In
  • 3x Digital Incremental Encoder In
  • 3x EnDat Master
  • 3x SSI Master
  • 2x Hall Encoder In
  • 1x Resolver In

Analog In

  • 6x Voltage In
  • 6x Voltage Signal Capture

Digital In

  • 4x PWM/PFM In
  • 4x Multi Bit In
  • 4x Trigger In

Digital Out

  • 16x Multi Bit Out
  • 16x PWM/PFM Out
  • 16x Multi-Channel PWM Out
  • 2x Block Commutated PWM Out
  • 4x Digital Pulse Out

  • SCALEXIO Product Information, PDF, English, 16194 KB
Support Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.