DS6365-PE Automotive Ethernet Board

Multi-Gigabit Automotive Ethernet ports for SCALEXIO Processing Unit

The DS6365-PE Automotive Ethernet Board is a PCI Express board that provides two independent ports for connecting external devices to a SCALEXIO Processing Unit via a single pair Automotive Ethernet. Both interfaces can be configured to a transmission rate of 2.5, 5 or 10 Gbit/s. By supporting these high bandwidth, it is designed to connect demanding high performant control units and sensor interfaces.

Technical Data

 

Parameter

Specification1)

Controller

Broadcom® BCM89890M Ethernet controller

Supported standards

2.5GBASE-T1, 5GBASE-T1, 10GBASE-T12), and MACsec support (MACsec is currently not supported by software)

Data rate
  • 2.5 Gbit/s (full duplex)
  • 5 Gbit/s (full duplex)
  • 10 Gbit/s (full duplex)
  • Autonegotiation

Connectors
  • 2 × Multi-Gigabit Automotive Ethernet Sockets

Board interface
  • Designed to PCI Express Revision 3.0 Electrical Interfaces
  • Operable in x1, x4, x8 and x16 slots
  • Supports up to 8.0 GT/s speed

Typical power consumption

9 W (typ. 0.75 A, at +12 V)

Physical size

190 × 110 × 23 mm (with bracket)

Slot dependencies

Requires 1 PCIe 3.0 x4 slot in a SCALEXIO Processing Unit for full-speed communication

The board is compatible down to PCIe 1.0 x1 but when it is used in such a slot, the communication speed is lower.

1) Unless stated otherwise, the specifications are valid only if the dSPACE hardware is correctly connected to the power, switched on, and ready for operation.

2) Adapted and reprinted with permission from IEEE. Copyright IEEE 2018. All rights reserved.

Stay up-to-date with our dSPACE direct newsletter service.

With our dSPACE newsletter service, we will keep you informed about current use cases and new solutions and products, as well as trainings and events. Sign up here for a free subscription.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.