The cost-efficient DS6335-CS Ethernet Board for the SCALEXIO AutoBox/LabBox is ideal if you do not need to handle with communication description files (e.g., ARXML). You can efficiently define a UDP or TCP communication by using the relevant ConfigurationDesk Functions or implement your own protocol as a custom function.
The integrated Ethernet switch is easy to configure and connects the 4 Intel I210 Gigabit Ethernet controller with the 5 external ports.
In comparison to the DS6333-CS Ethernet Board, this cost-efficient variant of the board is not supported by the Ethernet Configuration Package.
Technical Details
|
Parameter |
Specification |
|
|---|---|---|
|
Provided channel types |
|
|
|
Controllers |
4 × Intel® I210 Gigabit LAN (each has its own MAC address1)) |
|
|
Ethernet Switch |
1 × Marvell® Link Street®-88E6390 (configurable via software) |
|
|
Sockets for Ethernet modules |
2 |
|
|
Supported Ethernet modules |
|
|
|
Onboard standard Ethernet port |
Supported standards |
10BASE‑T, 100BASE‑TX, and 1000BASE‑T2) |
|
Data rate |
Configurable via software:
|
|
|
Connector |
1 × RJ45 |
|
|
Board interface |
PCIe 2.0 x4 |
|
|
Typical power consumption |
9 W (with Ethernet modules) |
|
|
Physical size |
273 x 100 x 20 mm (with fastening bracket) |
|
|
Slot dependencies |
Requires 1 slot with PCIe support in a SCALEXIO AutoBox/LabBox3) |
|
1) You find a label for the MAC addresses on the board.
2) Adapted and reprinted with permission from IEEE. Copyright IEEE 2018. All rights reserved.
3) You can use up to five Ethernet boards (DS6333-CS, DS6335-CS, and/or DS6336-CS) in a SCALEXIO AutoBox/LabBox. It is recommended to use the slots with PCIe x4 support first. When you work at very high data rates and use all controllers, slots with PCIe x1 support might not support full Ethernet speed.
