DS6333-CS/PE Automotive Ethernet Board
Additional Ethernet ports for SCALEXIO systems
The DS6333-CE/PE Ethernet Board is a PCIe board that provides two independent standard Ethernet ports with two LAN ports each and one additional onboard LAN port for connecting external devices. Different Ethernet modules are available to support standard Ethernet or automotive Ethernet.
DS6333-CS Automotive Ethernet Board
The DS6333-CS Automotive Ethernet Board is designed to be used in the SCALEXIO LabBox and the SCALEXIO Autobox in combination with the DS6001 Processor Board.
DS6333-PE Automotive Ethernet Board
The DS6333-PE variant of this Ethernet board extends your SCALEXIO Processing Unit with four Ethernet controller.
Technical Details
|
Parameter |
DS6333-CS |
DS6333-PE |
|
|---|---|---|---|
|
Provided channel types |
|
|
|
|
Supported networks |
|
|
|
|
Controllers |
4 × Intel® I210 Gigabit LAN (each has its own MAC address) |
4 × Intel® I210 Gigabit LAN (each has its own MAC address1)) |
|
|
Ethernet Switch |
1 × Marvell® Link Street®-88E6390 (configurable via software) |
1 × Marvell® Link Street®-88E6390 (configurable via software) |
|
|
Sockets for Ethernet modules |
2 |
2 |
|
|
Supported Ethernet modules |
|
|
|
|
Onboard standard Ethernet port |
Supported standards |
10BASE‑T, 100BASE‑TX, and 1000BASE‑T2) |
10BASE‑T, 100BASE‑TX, and 1000BASE‑T2) |
|
Data rate |
Configurable via software:
|
Configurable via software:
|
|
|
Connector |
1 × RJ45 |
1 × RJ45 |
|
|
Board interface |
PCIe 2.0 x4 |
PCIe 2.0 x4 |
|
|
Typical power consumption |
9 W (with Ethernet modules) |
9 W (with Ethernet modules) |
|
|
Physical size |
273 x 100 x 20 mm (with fastening bracket) |
220 × 121 × 21 mm |
|
|
Slot dependencies |
Requires 1 slot with PCIe support in a SCALEXIO AutoBox/LabBox3) |
Requires 1 PCIe slot in a SCALEXIO Processing Unit |
|
1) You find a label for the MAC addresses on the board.
2) Adapted and reprinted with permission from IEEE. Copyright IEEE 2018. All rights reserved.
3) You can use up to five Ethernet boards (DS6333-CS, DS6335-CS, and/or DS6336-CS) in a SCALEXIO AutoBox/LabBox. It is recommended to use the slots with PCIe x4 support first. When you work at very high data rates and use all controllers, slots with PCIe x1 support might not support full Ethernet speed.
