For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

DS4003 Digital I/O Board1)

Large number of digital I/O channels

The DS4003 Digital I/O Board provides a large number of digital I/O channels for various applications in rapid control prototyping and hardware-in-the-loop simulation.

Handling digital I/O channels

In rapid control prototyping and hardware-in-the-loop simulation, many digital signals have to be handled. This means that digital I/O lines have to be controlled. The DS4003 Digital I/O Board provides 96 digital I/O lines grouped into three I/O ports of 32 bits, each with handshake and strobe signals.

Parameter Specification
General
  • Release output for external release logic
  • I/O error monitor output and I/O error request input for error monitoring of external devices
  • Two customization module connectors (pin headers) supporting digital I/O lines and power supply of two ports
Interrupt controller Interrupt sources
  • Three user interrupts, one per port
  • Three strobe interrupts, one per port
  • One interrupt on I/O error
  Voltage range
  • TTL input level
Digital I/O Lines provided by each port
  • 32 I/O lines programmable in 8-bit groups, usable as non-strobed input, strobed input or output
  • One strobe input
  • Two handshake lines for acknowledge and output ready
Voltage range
  • TTL input level
Output current
  • 15 mA out (high, 2.4 ... 5 V), 24 mA in (low, 0 ... 0.8 V)
Input current
  • 0.12 mA in (high, 2.4 ... 5 V), 0.2 mA out (low, 0 ... 0.8 V)
Physical connections
  • Three 50-pin male Sub-D connectors (three brackets required)
Host interface
  • One 8- or 16-bit ISA slot (power supply only)
Physical characteristics Physical size
  • 340 x 125 x 15 mm (13.4 x 4.9 x 0.6 in)
  • The board requires three brackets
  Ambient temperature
  • 0 ... 70 °C ( 32 ... 158 °F)
  Power supply
  • +5 V ±5%, 1.5 A (without customization modules/external loads)

1)The end of life of the dSPACE PHS (peripheral high-speed) hardware for modular systems is planned for December 31, 2024. You can still buy the related products up to and including December 31, 2021. New Releases of dSPACE software will still support the dSPACE PHS hardware for modular systems until at least the end of 2023. After the end of life, no services of any kind will be available for these products. We advise against using the PHS hardware products in new projects. For new projects we recommend that you use SCALEXIO, the latest dSPACE technology for modular real-time systems.

Basic Information More Information Contact Information