Your Partner in Simulation and Validation
Trends & Technologies
Trends & Technologies
Commercial & Off-Highway Vehicles
Technologies & Standards
dSPACE Engineering Services
Product Support Centers
Installation & Licensing
Software Downloads & Patches
Version & Compatibility
Product Lifecycle Information
Get in Contact
Advanced Driver Assistance Systems
Body / Comfort electronics
Field of Operation
Automatic Production Code Generation
Data Driven Development
Topics of Interest
Artificial Intelligence (AI)
Calibration & Measurement
Bus and Network Support
Functional Mock-up Interface (FMI)
V-ECU (Virtual ECU)
ASAM HIL-API / ASAM XIL
New Licensing Technology
Legacy Licensing Technology
New Installation Technology
ASM (Automotive Simulation Models)
ASM Gasoline Engine Basic Model
ASM Diesel/Gasoline Engine Simulation Package
ASM Diesel/Gasoline Engine In-Cylinder Simulation Package
ASM Diesel Engine InCylinder Model
ASM Diesel Engine Model
ASM Drivetrain Basic Model
ASM Environment Model
ASM Gasoline Engine InCylinder Model
ASM Gasoline Engine Model
ASM Turbocharger Model
ASM Diesel Exhaust System Model
ASM Electric Components Model
ASM Vehicle Dynamics Model
ASM Truck Model
ASM Trailer Model
ASM Brake Hydraulics Model
ASM Pneumatics Model
ASM Traffic Model
ASM Kinematics and Compliance Model
ASM Satellite Model
dSPACE AUTOSAR Compare
AUTOSAR Network Management Solution
Battery Simulation Power Supply Unit
Communication Matrix Manager
DARTS (dSPACE Automotive Radar Test System)
Smart Charging Solution
dSPACE Installation Manager
ECU Interface Manager
EPSS_FPGA - Electrical Power Systems Simulation Package (FPGA)
EPSS_PROC - Electrical Power Systems Simulation Package (PROC)
Electrical Power Systems Simulation Package
Failure Simulation Package
RTI Bypass Blockset
RTMaps Interface Blockset
SCALEXIO Processing Unit
TargetLink Blockset (stand-alone)
Competence in Autonomous Driving
Let's get autonomous driving on the road. dSPACE provides innovative technology for your next steps.
ControlDesk: Customizing Instruments
Adding a Python script to a ControlDesk instrument lets you extend the instrument's functionality via automation.
SIMPHERA - Enter simpliCity
SIMPHERA, the web-based, highly scalable solution for the simulation and validation of functions for autonomous driving.
New Licensing: Activating Licenses and Decrypting Software Archives
This video guides you through the license activation process for single-user licenses as well as the decryption process (valid only for dSPACE Release 2017-B and later).
Smarter, Faster E-Mobility
Our industry-proven e-mobility solutions will give you the support you need throughout all development phases
ConfigurationDesk Tutorial Videos
These tutorial videos give you an overview of the main functions of dSPACE ConfigurationDesk.
AUTERA is the new in-vehicle prototyping and data logging system for autonomous driving applications. Shape the autonomous era!
Installing dSPACE Software
This video shows you how to install dSPACE software (valid only for dSPACE Release 2017-B and later).
SIMPHERA - A Revolution for AD Simulation and Validation
dSPACE has just launched a completely new, web-based and cloud-ready solution that addresses and meets the requirements for developing and testing highly automated vehicles: SIMPHERA
First Steps with ASM
These tutorial videos show you how to get started with ASM.
ControlDesk Demo Video
These videos give you an even deeper insight into the functions of ControlDesk.
Introduction to TargetLink
These videos show basic concepts of working with TargetLink
Video of dSPACE's MicroLabBox. The new, compact control system development platform for laboratory use, dSPACE MicroLabBox, offers high computing power and comprehensive functionalities.
ControlDesk: Measuring on dSPACE Platforms
These ControlDesk tutorial videos show you how to perform a triggered measurement on a dSPACE platform.
How to Get to HIL Testing (1/3) – HIL Workflow for Beginners
Webinar Recording (May 22, 2019): dSPACE demonstrates how to set up a HIL simulator.
Creating 3D Content for Sensor Simulation
In this podcast episode Matthias Thurau discusses the many advantages of testing in a virtual environment and explains how you can create 3D content using dSPACE tools.
ControlDesk: Electrical Error Simulation
To test ECU software in ControlDesk under error conditions, electrical error simulation via XIL API EESPort is used.
ControlDesk: Getting Started with the Internal Interpreter
These tutorial videos show you how to to get started when automating ControlDesk via the Interpreter controlbar.
These videos give you an even deeper insight into the functions of AutomationDesk.
New Licensing for dSPACE Products: An Overview
As of dSPACE Release 2017-B, the licensing technology for protecting dSPACE software changes. This video introduces you to the new technology.
AutomationDesk: Signal-Based Testing
This AutomationDesk tutorial video provides information on signal-based testing and concrete instructions on how to use the Signal-Based Testing library and the Signal Editor.
New Licensing: Updating Licenses
This video guides you through the license update process with local access to a CmContainer (valid only for dSPACE Release 2017-B and later).
New Licensing: Setting Up a dSPACE License Server
This video shows you how to set up a dSPACE License Server with CodeMeter Runtime (valid only for dSPACE Release 2017-B and later).
ControlDesk: Handling the Plotters
These tutorial videos give you an overview of handling the plotters in ControlDesk: the Time Plotter, the Index Plotter, and the XY Plotter.
New Licensing: Connecting to a dSPACE License Server
This video shows you how to connect a host PC to a dSPACE License Server using CodeMeter Runtime (valid only for dSPACE Release 2017-B and later).
Over-the-Air Radar-in-the-Loop Simulation
Validating radar sensors and functions for autonomous driving
Power Hardware-in-the-Loop Testing
Power HIL systems from dSPACE provide highly dynamic emulation of electric motor and battery components with several hundred kilowatts of power and voltages up to 1,250 V.
dSPACE Model Compare – Interaction with VCSs
You can easily integrate Model Compare into various Version Control Systems (VCS)
New Licensing: Migrating from WibuKey Dongles
This video guides you through the migration process for WibuKey Dongles (valid only for dSPACE Release 2017-B and later).
New Licensing: Activating Floating Network Licenses
This video guides you through the license activation process for floating network licenses (valid only for dSPACE Release 2017-B and later).
SIMPHERA - How to enter simpliCity
Learn about SIMPHERA, dSPACE's new web-based AD simulation and validation solution.
Simulating and Testing TargetLink Code
These videos show TargetLink's built-in verification and validation support
Validating Next Generation Radar Sensors in the Lab
The dSPACE Radar Test Bench – Advanced 6D allows for reproducible and precise tests by over-the-air stimulation of radar sensors in all dimensions.
RTMaps Demo Video
This video shows RTMaps, the development environment for multisensor applications (ADAS, robotics, …).
Model Compare Quick Guide
This video introduces you to key features of Model Compare.
Raw Data Injection – LIDAR validation and simulation
Gain a sneak peek at one of the latest dSPACE labs innovations: injecting simulated raw data directly into a Lidar sensor, to test and validate the sensor and ADAS/AD applications alike.
Usability tools for traffic simulations in Modeldesk
Accelerate your software development process by testing and validating virtually. Recording of our Innovation Coffee Break demo (November 2, 2020)
ConfigurationDesk Introduction to the Bus Manager – Implementing CAN and LIN Communication
This video shows you how you can configure CAN and LIN communication by using the Bus Manager in ConfigurationDesk and implement the bus communication in a real-time application.
HIL Systems for Testing V2X Applications
dSPACE offers a comprehensive tool chain for testing V2X systems
First Impressions of AURELION
AURELION is the new dSPACE solution for sensor-realistic simulation and marks a significant advancement.
Watch the recording of our Innovation Coffee Break demo (August 3, 2020) to learn about dSPACE high-voltage test systems
VEOS: Simulation on Linux Systems
Software-in-the-loop testing with VEOS on Linux, demonstrated in our newest Innovation Coffee Break.
These example videos give an insight into the virtual validation workflow.
ControlDesk: Handling the Table Editor - Changing Values
These tutorial videos show you how to change function values and axis points and how to export table data.
Adaptive AUTOSAR Virtual ECUs
With the dSPACE SIL tool chain, you can generate and simulate Adaptive AUTOSAR V-ECUs - as presented in our newest Innovation Coffee Break.
New Licensing: Migrating from Old CmDongles
This video guides you through the migration process for CmDongles delivered before dSPACE Release 2017-B.
These six videos show a workflow for developing system architectures.
Mechatronic Steering Test Bench
Developing and fine-tuning electric steering systems
Scaling and autoscaling with TargetLink
Fine-tune your code manually or automatically
Fuel Cell Simulation
Learn about our experience in test systems for fuel cell control units in the recording of our Innovation Coffee Break demo (September 14, 2020)
From development to testing – SCALEXIO is your universal real-time system.
ConfigurationDesk – Connect your Models to dSPACE Hardware
Webinar Recording (November 29, 2018): dSPACE demonstrates how to easily connect your SCALEXIO Hardware to your models using ConfigurationDesk
Video: dSPACE tool chain used by MAN
Validating advanced driver assistance systems – Virtual test drives with hardware-in-the-loop simulation
ControlDesk: Handling the 3-D Viewer
These tutorial videos show you how to display items in a 3-D environment using the 3-D Viewer instrument.
Rapid Control Prototyping
Overview over the dSPACE RCP portfolio for laboratory and in-vehicle usage. Recording of our Innovation Coffee Break demo (October 26, 2020)
Testing of Ultrasonic Sensor Applications
Ultrasonic Sensors: Over-the-air stimulation of the real sensor in a test bench setup. Recording of our Innovation Coffee Break demo (September 28, 2020)
Series of MotionDesk videos
This video shows the superimposed representation of the vehicle behavior of two different chassis configurations in a step-steer maneuver simulated by the ASM tool suite
Vehicle Software Verification & Validation Using Virtual ECUs
Recording of online workshop (July 15, 2021)
Functional Mock-up Interface
These four videos demonstrate how FMUs can be integrated into one simulation application.
ControlDesk: Handling the Table Editor - Overview and Connections
These tutorial videos give you an overview of the Table Editor and show you how to connect variables.
How to Get to HIL Testing (2/3) – Test Workflow for Beginners
Webinar Recording (September 12, 2019): dSPACE demonstrates a basic HIL test workflow.
ECU Software Development with SystemDesk and EB tresos Studio
Webinar Recording (March 27, 2014): This webinar recording demonstrates how to develop ECU software from the software architecture to the basic software with SystemDesk and EB tresos.
Data Logging for the Data-Driven Development Pipeline: Today and Tomorrow
Recording of online workshop (September 9, 2021)
Data Replay - Validating ADAS/AD with Recorded Data
To master safety for ADAS/AD, recorded real-world data is used as an essential step in the homologation and release strategies.
How to Implement a Continuous Integration Workflow with Model-Based Development (MBD)
Recording of online workshop (February 11, 2020)
Physics-Based Sensor Models for High-Fidelity Simulation
Sensor simulation models for camera, lidar and radar sensors. Recording of the Innovation Coffee Break demo (July 13, 2020).
Video of Euro NCAP Test Environment
Euro NCAP test scenarios for AEB City, Inter-Urban, and AEB VRU (Vulnerable Road User)/Pedestrian, including an overview of the dSPACE tool chain.
MicroAutoBox III - Next Generation Rapid Prototyping
Next Generation Rapid Prototyping. Recording of the Innovation Coffee Break demo (July 6, 2020).
Shaping the Future of Battery Technology
When it comes to Electro Mobility and Electric Vehicles, battery management systems (BMS) are safety-critical. Watch the recording of our Innovation Coffee Break demo (November 9, 2020) to learn how to test your BMS with dSPACE strength.
Mechatronic Testbench: 3D Motion Platforms
Our Innovation Coffee Break presents the dSPACE 3-D Motion Platform - THE platform for testing and validating support systems like electronic stability control (ESC).
DARTS Multitarget Capability
Simulate radar targets and echoes for automotive radar sensors easily but accurately. Recording of the Innovation Coffee Break demo (June 15, 2020).
HIL Testing of Power Electronics and Electro-Mechanical Components
Recording of online workshop (June 11, 2020)
TargetLink Property Manager
TargetLink 4.3 ships with an all new Property Manager. This video shows you the new features and basic concepts.
Come Work for dSPACE!
Learn first-hand what makes us a desirable employer
Hardware-in-the-Loop Tool Chain for Euro NCAP Tests
One-stop solution for comprehensive test scenarios
Hyundai MOBIS: VIL Testing
Hyundai MOBIS is using the vehicle-in-the-loop (VIL) testing method, to efficiently validate advanced driver assistance systems with synchronous virtual and real test drives.
Software Design with the TargetLink Data Dictionary
These videos give you an overview of designing software with the TargetLink Data Dictionary.
More Options for Code Generation – Introducing the New TargetLink Add-On Package
Recording of online workshop (June 17, 2021)
Test and validation of ultrasonic parking systems
Virtualize the test procedures based on simulation Over The Air, as frontloading the end-to-end testing and validation of the ultrasonic sensor system to the lab can help detecting implementation errors in an early stage of development.
TargetLink Data Dictionary Three-Way Merge
Comparing and automatically merging DD files
RTMaps for Students
Prepare yourself for a career as a software engineer and join the RTMaps community now!
Making the Traceability Connection from ALM to Model-Based Engineering Tools
Webinar Recording (August 8, 2018): how you can achieve end-to-end traceability between Application Life-Cycle Management (ALM) tools and model-based engineering tools
TargetLink Data Dictionary Custom Functionality
Adding custom functionality to the TargetLink Data Dictionary Manager
Watch the recording of our Innovation Coffee Break demo (September 7, 2020) on how the Smart Charging Solution can help you switch mobility to electric even faster
Fuel Cell Modeling and Simulation
Recording of online workshop (October 22, 2020)
Challenges and Solutions for Communication Matrix Handling
In this Learning Bits episode you learn about solutions for managing communication matrices in vehicle communications.
Intersection Assistant Video
Validating intersection assistant systems – create and visualize a road intersection in 3-D with the dSPACE tool chain.
Levels of Virtual ECUs
In this episode, Barbara Kempkes explains what the different levels of virtual ECUs are and how they can be applied.
Lifecycle Traceability with SYNECT and codebeamer
Recording of online workshop (April 8, 2021)
How to Ensure Battery Safety in Electric Aircraft
Challenges and testing options for using batteries in electric aircraft.
ASM Vehicle Dynamics Models
Various videos using ASM Vehicle Dynamics Models
How to Get to HIL Testing (3/3) – HIL Testing and Functional Safety
Webinar Recording (Nov 06, 2019): HIL testing as crucial part of the verification and validation process and to assure functional safety.
New Licensing: Basics on Floating Network Licenses
As of dSPACE Release 2017-B, floating network licenses for dSPACE software use the CodeMeter licensing technology. This video introduces you to the basics on floating network licenses for dSPACE software.
From Prototype to Production: HIL for Autonomous Driving
This webinar recording will present a flexible and scalable solution for developing validation methods for autonomous development.
Creating Bus Simulation for RCP, HIL, and SIL
dSPACE solution for bus simulation. Recording of the Innovation Coffee Break demo (June 29, 2020).
On-Target Bypassing with TargetLink and the ECU Interfacing Toolchain
Simulation and Testing of Electric Powertrain Systems
Recording of online workshop (June 4, 2020)
The dSPACE data logging solution, based on the AUTERA product families, enables you to master data logging challenges.
Scenario-Based Testing in a Virtual World and with HIL Test Systems
Recording of online workshop (May 28, 2020)
The Importance of Partner Ecosystems in Tech
Why is it important to establish partner ecosystems and what are the benefits that can be realized
Autonomous parking in a parking garage
Validate parking assistant systems with the dSPACE tool chain
Functional Mock-up Interface - Webinar Recording
Webinar Recording (November 12, 2015): This webinar recording demonstrates how to exploit the features of the Functional Mock-up Interface (FMI) with the dSPACE tool chain.
ControlDesk: Handling the Table Editor - Views
These tutorial videos show you how to use the different views in the Table Editor.
With Model Compare, you can find all changes, even in large models.
Validation of 5G Automotive Applications
LTE and 5G with the dSPACE SCALEXIO HIL system empowers early development and end-to-end validation without local 5G infrastructure.
Generating virtual ECUs without AUTOSAR
Webinar Recording (November 25, 2015): Generate virtual ECUs in non-AUTOSAR projects
Mastering DO-178C Using Model-Based Design and Autocoding
Webinar Recording (May 28, 2015): How to use model-based methods for DO-178C- and DO-331-compliant software development
Data Management, from Data Selection to KPI Extraction
Recording of online workshop (July 29, 2021)
Generation of road networks from high-definition maps
New Radar Test Benches for Over-the-Air Testing
In this podcast episode, Dirk Berneck talks about using radar test benches for over-the-air (OTA) testing.
Refining Your AUTOSAR Tool Chain
Track changes, merge file and automate your AUTOSAR tool chain. Recording of our Innovation Coffee Break demo (August 10, 2020).
Data Enrichment and Scenario Generation for AI Training and Testing
Recording of online workshop (May 14, 2020)
Efficient Development of AUTOSAR Software Components
Webinar Recording (March 09, 2010): Learn more about us and our products at international trade shows and conferences
Testing Highly Automated Driving
Testing automated driving functions by means of simulation
Watch our Innovation Coffee Break to learn about the dSPACE Test Solution Package, containing SYNECT, AutomationDesk and the Test Authoring Framework (TAF).
Model-Based Development According to ISO 26262
Webinar Recording (November 18, 2009): Webinar concerning the requirements of ISO 26262 for safety-relevant systems, right up to ASIL D, the highest safety level.
ASM Ground Truth Sensors
Realistic simulation of object detection in urban traffic
Safety in Automotive Software - SOTIF and ISO 26262
Recording of online workshop (August 13, 2020)
Scenario Generation: Elevate your test and validation activities with real-world scenarios
A roundtrip through the ScenarioGeneration service by dSPACE and understand.ai.
What are virtual ECUs?
Have you ever wondered what virtual ECUs are? Let’s look at them from two different perspectives: the function developer’s point of view and the HIL tester’s point of view.
What is Data Annotation and Why is it Needed?
A new dSPACE Learning Bits episode on data annotation used for training and validating AI algorithms.
Autonomous Driving Webinars (5/6): Watchdogs are a Tester’s Best Friends
Webinar Recording (September 21, 2017): In this webinar recording you will learn how to easily and effectively define watcher conditions to monitor and measure data in critical traffic scenarios based on dSPACE ASM and ModelDesk
MISRA C Made Easy with the TargetLink Ecosystem
Webinar Recording (October 10, 2017): How to efficiently exploit the TargetLink ecosystem to achieve MISRA C compliance.
Development of e-Drive Control Algorithms
Solutions for e-Drive control. Recording of the Innovation Coffee Break demo (June 8, 2020).
dSPACE AUTOSAR Compare Workflow
Watch these two videos to see the simple workflow in the tool and learn about the rule-based merge functionality for the fully automated merging of files.
dSPACE Model Compare – Enhanced Visualization for User-Specific Blocks
In Model Compare, you can customize the visualization for user-specific blocks according your individual needs
Maneuver Based Engine Tests
Maneuver-based test drives on an engine test bench
SCALEXIO LabBox: Getting Started
These tutorial videos show you how to install, configure, and register a DS6001 Processor Board.
3-D Motion Platforms
Testing control devices with integrated motion sensors
Automotive Software Development Process Engineering
Recording of online workshop (June 18, 2020)
Save Test Systems for Test Executions – Perform the Test Evaluation Elsewhere
Webinar Recording (Oct 30, 2019): Save Test Systems for Test Executions – Perform the Test Evaluation Elsewhere
Adaptive AUTOSAR Code Generation, powered by TargetLink
Develop high quality software for the new ECU generations: with Adaptive AUTOSAR, using a model-based approach, powered by TargetLink.
Data logging and Edge Computing for Autonomous System Development
Recording of online workshop (May 7, 2020)
Simulate realistic environment and generate reliable data with dSPACE Sensor-Realistic Simulation. Watch the recording of our Innovation Coffee Break demo (November 16, 2020).
Webinar - Introducing AUTOSAR, Workflows and Tools
Webinar Recording (June 30, 2011): This free webinar, hosted by dSPACE and Elektrobit, provides a basic introduction to the up-and-coming AUTOSAR standard for developing in-vehicle software.
ASM Fuel Cells
In this podcast episode, dSPACE presents a solution for testing the control algorithms behind fuel cell systems.
HIL Testing for Electromobility – Let’s Talk About the Striking Advantages
Recording of online workshop (September 10, 2020)
Complete Data-Driven Development for Autonomous Vehicle Implementation
Recording of online workshop (September 17, 2020)
How can an AUTOSAR Project be virtually validated in the dSPACE tool chain
This video helps you to answer following questions: Which dSPACE tools are used for AUTOSAR virtual validation? How do TargetLink, SystemDesk, VEOS, ControlDesk, and hardware-in-the-loop simulation interact in an AUTOSAR scenario?
Integration of Elektrobit Basic Software in a Virtual ECU for Diagnostic Testing
Webinar Recording (June 14, 2018): dSPACE and Elektrobit demonstrate how basic software modules can be integrated in a virtual ECU.
High Bandwidth Data Logging with AUTERA
Watch how we demonstrate the remarkable logging bandwidth of over 50Gbit/s of our AUTERA platform.
800 V Fast Charging with the dSPACE Smart Charging Station Emulator
The dSPACE Smart Charging Station Emulator provides full power on the 400 V and 800 V levels with only one power supply setup
Autonomous Emergency Braking
Detection of vulnerable road users
Living MBD (1/5) – Modern Model-Based Development
Webinar Recording (February 19, 2019): our series “Living MBD” addresses modern approaches to mastering the challenges of model-based software development.
Testing Automotive Radar ECUs and Software
Recording of online workshop (May 6, 2021)
Michigan Technological University: Efficient Platooning
Watch how cooperative and predictive control strategies boost energy efficiency in automated vehicles.
Over-the-Air Radar Testing: High Resolution and High Bandwidth
Watch our Innovation Coffee Break to learn how to test and validate modern radar sensors with the new dSPACE Automotive Radar Test System
University of Michigan: Implementing Controllers on Real Machines
Watch how the University of Michigan uses equipment from dSPACE in training classes to implement controllers on real machines.
University of Tokyo: High speed Robot
Baseball-playing robot system demonstrates perfect and quick pitching and batting technology.
ASM Traffic – Roadworks
Video: Lane Detection for Automated Driving
Electrical Power Systems Simulation Package
Watch in our newest Innovation Coffee Break how dSPACE provides different approaches for simulating power electronic circuits in real time.
Getting Started with Adaptive AUTOSAR
Recording of online workshop (October 1, 2020)
Platooning Simulation with ASM
Realistic simulation of object detection in urban traffic
Powerful Hardware-in-the-Loop Solutions to Expand Test Coverage of Modern Power Electronics
Recording of online workshop (May 20, 2021)
Production Software Development for E-Mobility Applications with TargetLink
Discover our solutions for production software development with our new Innovation Coffee Break
A testing solution for Collective Perception, a new level of V2X. Watch our InnovationCoffeeBreak (November 30, 2020).
Watch the recording of our Innovation Coffee Break demo (July 27, 2020) to learn about Data Logging for development and validation for autonomous driving functions with the new AUTERA system
How to Get to Requirements-Based Testing
Webinar Recording (March 24, 2015): This webinar recording shows you how to perform requirements-based testing for all development and testing phases, from software unit to system level tests, from manual to automated testing.
MicroAutoBox III - Buses and Networks
Watch the recording of our Innovation Coffee Break demo (August 17, 2020) to learn how to reduce communication complexity of buses and networks by using the MicroAutoBox III
Register SCALEXIO and Add Hardware Topology
How to create a new ConfigurationDesk project? How to register SCALEXIO in ConfigurationDesk? How to add the SCALEXIO hardware topology in ConfigurationDesk?
TargetLink for Safety-Related Systems
This video gives you an overview of the TargetLink certification and the use of TargetLink for safety-critical applications
Code Coverage & ISO 26262 – Is it Really Dead?
In this Learning Bits podcast we explore how much code coverage we can and should really achieve
Autonomous Driving Webinars (4/6): Sensor Simulation: Key to Autonomous Driving Development
Webinar Recording (June 28, 2017): In this webinar recording dSPACE shows the different dSPACE solutions for sensor simulations: starting from ground truth sensor models to raw data stimulation via GPU-based physical sensor models.
dSPACE AUTOSAR Compare Overview
Our new product dSPACE AUTOSAR Compare is the tool for securing and speeding up your AUTOSAR workflow.
Emulation of Charging Stations – Manipulation Features
The manipulation features of the dSPACE Charging Station Emulator enable systematic tests of charging related components and allow full control of communication handling and power electronics.
How to Add dSPACE Software to an Existing Installation
You bought new dSPACE software for an existing installation. To use it, you have to add the new license information during software installation.
Real Data Replay for AI Training
Recording of online workshop (July 23, 2020)
Testing Automotive Radar ECUs and Software
Recording of online workshop (September 24, 2020)
dSPACE Electrical Power Systems Simulation Package
Easy-to-use but precise real-time simulation of power electronic circuits
Function-in-the-Loop Testing via ECU Interfacing
Learn how to perform function-in-the-loop tests without wiring up the whole electrical interface of the ECU in the recording of our Innovation Coffee Break demo (September 21, 2020)
Simulating and Testing V2X
Recording of online workshop (August 6, 2020)
Real-World vs. Simulation - Testing Camera-Based Functions for AD
In this podcast Gregor Sievers explains how numerous conditions can be interjected into the test scenario effectively and efficiently by combining real world and simulated sensor camera data.
TargetLink Property Manager Validation Summary
The Validation Summary provides information on invalid model data.
Defining Boundaries – Communicating with Your ECU’s Software
In this episode, Tim Foerster presents different solutions for managing the task of ECU interfacing
Accelerate Your Innovations with dSPACE Prototyping Systems
In this podcast, Marius Mueller presents the dSPACE portfolio for performing fast prototyping in real environments and in real time.
Autonomous Driving Webinars (1/6): Challenge Accepted: Validating Autonomous Driving Functions
Webinar Recording (March 29, 2017): This webinar recording shows the introduction to our webinar series that addresses the validation of autonomous driving functions.
Can diagnostic tests be virtualized?
Using the dSPACE virtual validation tool chain and virtual ECUs, you can test diagnostics without a real ECU.
Emulation of Charging Stations with Real Power
Watch our InnovationCoffeeBreak to learn how the dSPACE Smart Charging Solution can accelerate development processes of high-voltage charging components (November 23, 2020).
Modeling Function Variants with Simulink®/TargetLink
Webinar Recording (July 01, 2010): This free dSPACE Webinar demonstrates how to model function variants using Simulink®/TargetLink and implement them by autocoding.
Model Compare Filter Options
This video introduces you to different filters in Model Compare.
Best Practices for Using Git with TargetLink
In this episode Felix Engel share best practices for using Git with TargetLink
dSPACE Test Authoring Framework (TAF) Solution
Carrying Out Test Cases Just Got Faster and Easier
The new MicroAutoBox III is the next generation of the established dSPACE MicroAutoBox, a real-time system for performing fast, in-vehicle function prototyping
Advanced Hybrid Vehicle Real-Time Simulation
Simulation of P2 hybrid powertrain architectures
Accurate detection of contours via ray-based sensor models
Generation of Virtual Electronic Control Units
Webinar Recording (July 08, 2013): This webinar recording demonstrates how to generate virtual electronic control units based on AUTOSAR.
Ohio State University: Next Level of HIL in EcoCAR
This presentation was a technical demonstration of the team’s continued development with its HIL setup.
P3 – Sensor-based Driving
This video shows a demo vehicle from P3 equipped with sensors and instruments to support the development of autonomous driving functions. In this vehicle, P3 uses RTMaps and MicroAutoBox to capture and process sensor data
Developing Blind Spot Detection Systems with dSPACE ASM
Modern blind spot detection systems can help to avoid critical situations for vulnerable road users. dSPACE ASM enable you to develop these solutions efficientely and virtually.
Highly Automated Driving on Highways
Configuring Construction Site Scenarios and Testing Automated Driving Functions
MotionDesk Lighting Conditions
Improved simulation of realistic lighting conditions in MotionDesk
Import of real traffic accidents from GIDAS into traffic simulations
Virtual Testing vs. Real-World Testing
dSPACE Learning Bits: Is testing in the virtual world the same as testing in the real environment?
Data Ingestion: From the Car to the Data Center in No Time
Efficient data uploads and a clear overview of the data acquisition process with dSPACE
Data Replay Validation for Autonomous Driving
Synchronous playback of recorded sensor and bus raw data for various application tasks. Recording of the Innovation Coffee Break demo (July 20, 2020).
How to Add New Licenses when Working with Multiple Dongles
This video walks you through adding new licenses for additional dongles to your dSPACE installation.
Testing Sensors for Autonomous Systems
In this dSPACE Learning Bits video podcast testing options for validating autonomous system sensors are discussed.
University of Michigan: From 3-D Printing to 3-D Sprinting
Watch how a unique algorithm enables 3-D printing at twice the speed.
DAF: Keeping the Right Speed
The video shows how Safe-Speed performs under simulated operating conditions.
Automated annotation via artificial intelligence. Recording of our Innovation Coffee Break demo (October 05, 2020)
Dynamic Motor Simulation on FPGA
Watch the recording of our Innovation Coffee Break demo (August 31, 2020) how Dynamic Motor Simulation on FPGA enables highest dynamics with maximum accuracy
High Performance Real-Time Simulation
Recording of Panel Discussion (December 3, 2020)
Mitsubishi Pikes Peak
The Mitsubishi MiEV EvolutionII is equipped with a dSPACE MicroAutoBox.
How can you manage complexity in modern vehicle systems?
Time Plotter View Modes and Signal Arrangement
How do I make multiple signals visible in the Time Plotter? How can I change the order of the signals in stacked view?
Variant-Based Testing with HIL Systems – The Elegant way
Webinar Recording (April 18, 2018): dSPACE shows you how HIL systems can be automatically prepared and used for testing different ECU versions and variants to achieve the best possible testing efficiency
dSPACE TargetLink Overview
With dSPACE TargetLink, you can configure the code generation process to get exactly the production code you want.
How to Add New Licenses After Removing All License Information
This video helps you solve the following problem: You removed all licenses from dSPACE Installation Manager and can no longer add any licenses for additional dongles.
Living MBD (5/5) – AUTOSAR: A Modern Plug-and-Play Approach
Webinar Recording (Nov 27, 2019): how to efficiently develop and test AUTOSAR-compliant software all the way from the software architecture to best-in-class production code
Turnkey concepts for closed loop testing on the mechanical power level. Recording of our Innovation Coffee Break demo (October 12, 2020)
Achieve functional safety for autonomous driving – but how?
Are you dreaming of perfectly specified test goals and processes for functions for automated driving? In reality, established process structures don’t match the corresponding requirements. Here’s how we can fix that.
Early Software Validation: Techniques and Standards
Recording of online workshop (June 25, 2020)
Safety for Automated Vehicles
dSPACE Learning Bits: How can edge computing benefit the development process for autonomous vehicles?
Simulation - The Key to Validating Functions for Autonomous Driving
Recording of online workshop (October 29, 2020)
The data management software by dSPACE – managing complex data safely, efficiently and centrally.
Building Ford’s Next-Generation Autonomous Development Vehicle
Our customers do amazing things with our products, e.g. MicroAutoBox.
Challenges in Data Logging for Autonomous Systems
In this new dSPACE Learning Bits podcast, solutions for overcoming data logging challenges for autonomous driving development is addressed.
dSPACE Inc.: Company Video
Company video of dSPACE Inc., USA
From Textual Requirements to Requirement Observers
Webinar Recording (November 08, 2016): dSPACE and BTC demonstrate how to use the dSPACE RTT Observer Library and the BTC Embedded Specifier to generate executable requirement observers from informal textual requirements and run them on dSPACE platforms.
Jump Start Your E-Mobility Function Development
Watch this Learning Bits podcast offering tips for speeding up your e-mobility function development processes.
Living MBD (3/5) – Getting Rid of Code Reviews
Webinar Recording (June 05, 2019): how to get rid of code reviews by frontloading all manual validation steps to the model level.
Scalable Cloud Simulation
Watch the recording of our Innovation Coffee Break demo (August 24, 2020) to learn how to enhance your test strategy
Tagging vs. Labeling - What’s the Difference?
Tagging, labeling and annotating data for artificial intelligence development. Watch this episode, featuring Intempora CEO Nicolas Du Lac.
Traffic Scenario Simulation to Test Functions of Driver Assistance Systems
Webinar Recording (May 09, 2011): This free-of-charge dSPACE webinar demonstrates how to create traffic scenario simulations with the dSPACE Automotive Simulation Models (ASMs).
30 Years of dSPACE
30 Years – Time to Celebrate! Our summer party on June 29/30, 2018 was all about our company anniversary.
EcoCAR Mobility Challenge: Propulsion Controls & Modeling Activity
GM, MathWorks and dSPACE provide propulsion control and modeling hardware and software needed to simulate the professional vehicle design process.
General Motors: Buick Regal Turbo Charged Engine
Electronics engineering for the Buick Regal Turbo Charged Engine.
Model-Based Development for AUTOSAR
Webinar Recording (April 03, 2012): This free-of-charge dSPACE webinar demonstrates how software components can be developed efficiently for the latest AUTOSAR versions 4.0 and 3.2.
The University of Adelaide: Diwheel Defies Gravity
Australian Students developed an Upside Down Vehicle
The exceptional fuel efficiency Tula delivers contributes to a cleaner environment, reduces dependence on oil and saves consumers money at the pump. Watch how it works!
Creating a Dynamic Virtual World for Testing Autonomous Driving Systems
Recording of online workshop (May 21, 2020)
Proven Radar Test Benches for Over-the-Air Testing and Advancement
Recording of online workshop (February 25, 2020)
How can Sensor Simulation Help Make Autonomous Cars Safer?
8 Tips for Data Logging
Our colleague Patrik Morávek shares 8 tips for an efficient and reliable data logging process
Smart Data Logging
Discover how artificial intelligence can be used in cars to reduce the amount of data for the development of autonomous driving functions with Smart Data Logging
Dealing with Increasing Communication Demands for Evolving ECU Architectures
Recording of online workshop (March 11, 2020)
Keys for Successful Testing of Autonomous Vehicle ECUs / HPCs
Recording of online workshop (March 25, 2020)
TargetLink Ecosystem MES
Webinar Recording (April 30, 2014): This webinar recording focuses on automated guideline checking and model analysis with the MES Model Examiner and MES M-XRAY to ensure transparent and easily inspectable TargetLink models.
Variable Message Signs
Detection and interpretation of variable message signs and traffic lights in autonomous driving simulations.
Autonomous Driving Webinars (2/6): Bring the Real World to your Virtual Test Drives
Webinar Recording: Webinar Recording (April 26, 2017): This webinar recording shows how to use the dSPACE ASM tool chain to define test drive scenarios and import real map and traffic data into your test setup
dSPACE World Conference 2019 Wrap-Up Video
More than 500 automotive industry experts from 30 countries came together to be inspired by presentations from global players and innovation leaders. This wrap-up video summarizes all the highlights.
How to Get the Best out of Your HIL Systems
Webinar Recording (May 10, 2017): dSPACE shows you how to quickly optimize the use of HIL systems, become ISO-26262-compliant, perform requirements-based testing, and achieve 24/7 HIL operation.
Logging Raw Data with Lightning-Fast Speed
Watch this Learning Bits podcast to find out what steps you need to take to ensure the precise recording of raw data and the use of highly synchronized sensors.
Over-the-air testing - DARTS
Over-the-air testing – how can real-world signals be emulated?
TargetLink Ecosystem BTC
Webinar Recording (January 29, 2014): This webinar recording demonstrates how to test and verify Simulink/TargetLink models and production code in an integrated process.
SIMPHERA - Seamless automated driving testing on SIL and HIL platforms
Learn about SIMPHERA: a brand new solution designed to bring simplicity to the process of simulating and validating your ADAS and AD software - hundreds of ECU software tests at once with the click of a button – on both SIL and HIL platforms
AI in Data Selection
Selecting the right data from your data lake is essential in training algorithms. Recording of our Innovation Coffee Break demo (October 19, 2020)
ASM Kinematics and Compliance
Designing and Testing Wheel Suspensions More Efficiently
Autonomous Driving Webinars (3/6): Taming the Test Crowd with Cluster Simulation
Webinar Recording (June 01, 2017): This webinar recording discusses key questions of how to handle increasing test numbers using a simulation cluster, outlines its design process, and gives a demonstration of a VEOS-based example cluster
AUTOSAR 4.0 – Architecture and Behavior Modeling Made Easy
Webinar Recording (December 04, 2012): AUTOSAR 4.0 – Architecture and Behavior Modeling Made Easy
Bring Your Ideas to Life with Powerful Development Tools
Recording of online workshop (April 22, 2021)
Developing and Testing Hybrid ECUs with ASMs
Webinar Recording (March 16, 2011): This free-of-charge dSPACE webinar demonstrates how to create a real-time-capable powertrain simulation with the dSPACE Automotive Simulation Models (ASMs).
dSPACE Technology Conference 2015
Watch the video on dSPACE’s 2015 Technology Conference!
dSPACE Learning Bits: How can edge computing benefit the development process for autonomous vehicles?
For Academia: Solutions for Designing, Controlling and Testing Autonomous Systems
Recording of online workshop (July 30, 2020)
Four Ways to Detect Undesired Changes During a Tool Version Migration
Recording of online workshop (October 15, 2020)
Downloading and Adding CodeMeter Licensing Files to an already Installed Product
This video guides you through the process of downloading legacy license files and adding the licenses to an already installed legacy dSPACE Release.
Downloading and Using CodeMeter Legacy License Files to Install a Product
This video guides you through the process of downloading legacy license files and using them to install a legacy dSPACE Release.
Basics on CodeMeter Legacy Licensing
This video introduces you to the basics of Legacy Licensing using CodeMeter Licenses.
Living MBD (2/5) – Real-World Validation of Production Code
Webinar Recording (March 27, 2019): learn how to deploy and validate a model’s production code in the real world.
Living MBD (4/5) – Passing the Ball – Multiplayer MBD
Webinar Recording (September 24, 2019): how to efficiently play the MBD game with large and distributed teams: Design, Develop, Test, Repeat.
Midwest User Conference 2014
Watch the video about dSPACE Inc.’s user conference and the presentation of dSPACE’s new MicroLabBox!
NXP's BlueBox 3.0 Automotive High Performance Compute Development Platform
The NXP BlueBox 3.0 is a development platform that provides the required performance, functional safety, and automotive reliability for engineers to develop safe automotive high-performance compute solutions for ADAS and zonal control architectures.
On-Target Bypassing with TargetLink
Webinar Recording (December 07, 2016): dSPACE demonstrates how to perform automotive function development and prototyping with an early focus on production code constraints.
Optimizing AUTOSAR Workflows with Component Containers
Webinar Recording (May 25, 2011): This free dSPACE webinar demonstrates how to develop AUTOSAR application software with the greatest of ease by using SystemDesk and TargetLink.
TargetLink Ecosystem – Early Detection of Runtime Errors and Resource Problems
Webinar Recording (September 24, 2014): Early Detection of Runtime Errors and Resource Problems by Combining Model-Based Design and Static Analysis.
University of Waterloo – Developing Smart, Fuel-Saving Technology
In this podcast episode,Asad Bhatti provides highlights on the EcoCAR Mobility Challenge and how his team is meeting requirements for controls development and testing.
Why is Automated Labeling Essential for Autonomous Driving?
Recording of online workshop (November 12, 2020)
Pinpointing Vehicle Software Errors – The Sooner the Better
Using virtualized electronic control units and software-in-the-loop testing, you can catch vehicle software errors very early in the development process.
TargetLink Signal Injection & Tunneling
These videos introduce you to signal injection and tunneling.
Optimizing Controller Code for Electric Drives
This webinar recording gives you an overview of hints and best practices on how to optimize a given model in order to achieve the targets imposed by your production hardware.
Boost Your Simulink / TargetLink Modeling Efficiency
Watch this Learning Bits podcast, featuring Model Engineering Solutions (MES), to see how you can save time and develop safer models.
Subscribe to our newsletters, or manage or delete your subscriptions
Your partner in simulation and validation
Customers about us
Conditions of Use
Imprint & General Terms and Conditions
North America |
© 2021 dSPACE GmbH
North America |