For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

Release 3.4, Build-No. 2002050801 for MATLAB® R12.1 /
Release 3.4.1 for MATLAB® R12.1

Release 3.4.1

Since August 2003 Release 3.4 is shipped on a CD ROM labeled

dSPACE Release 3.4.1
for MATLAB© R12.1
August 2003

This CD ROM contains both the original Release 3.4 Setup and the Release 3.4.1 Update.

The setup program at first installs Release 3.4. After rebooting the PC, the Maintenance Release 3.4.1 setup is started automatically.

If you don't have the Release 3.4.1 CD ROM available, you can download the Maintenance Release 3.4.1 from the Updates and Patches section to update an existing Release 3.4 installation.

For complete version information please refer to the information below and the Maintenance Release 3.4.1 page.


Release 3.4

Information available for this Release
Compatibility with non-dSPACE Software
Board-Specific Software
Documentation
Software Bundles CDP
Complete Contents List of Release 3.4

 

Compatibility with non-dSPACE Software

The software included on this Release is compatible with the following non-dSPACE software.

Software and Version Requirements for dSPACE Products
Windows 98, Windows Me, Windows NT 4.0 (Service Pack 3) or Windows 2000

For Windows NT 4.0 Service Pack 6a is highly recommended.
For Windows 2000 Service Pack 2 is recommended.
Required for all dSPACE software.
MATLAB Version:
6.1.0.450 (R12.1)
Required when using the following dSPACE software:
RTI1003, RTI1005, RTI1102, RTI1103, RTI1104, RTI1401, RTI-MP, RTI CAN Blockset, FFTACC Blockset and MLIB/MTRACE
Microsoft Internet Explorer 4.01 or later

(Internet Explorer 5.5 is supplied on this Release).
Required to access the online documentation
Texas Instruments TMS320C3x/C4x C Compiler Version 4.7 or 5.11 Required when using the following dSPACE hardware:
DS1003, DS1102 or DS230x
Microtec PowerPC C Compiler Version 2.0a* Required when using the following dSPACE hardware:
DS1005, DS1103, DS1104
or DS1401 (MicroAutoBox)
DS1004 Compiler version 1.1.1* Required when using the following dSPACE hardware:
DS1003/DS1004 (AlphaCombo)


*NOTE: These compilers are supplied on this Release and are installed automatically during installation if purchased with the dSPACE system.

The compiler for the DS1102, DS1003, or DS230x boards is supplied by Texas Instruments. For information on known problems regarding this compiler see the Release's Readme.txt file.

 

Board-Specific Software

The following board-specific software is included on this Release.

Software and Version Description
Device Driver Version 1.91 For use with all dSPACE software and hardware
ControlDesk® Basic 2.2 For use with all dSPACE hardware
RTLib1003 Version 3.3.1
RTLib1004 Version 2.6
RTLib1005 Version 1.3
RTLib1102 Version 4.5
RTLib1103 Version 1.5
RTLib1104 Version 1.1
RTLib1401 Version 1.5.1
Real-time libraries for use with the respective dSPACE boards

 

Documentation

The following documentation versions are valid for this Release. All the documents listed below are also available online.

Documentation Version
dSPACE Release New Features and Migration
(Release 3.4)
May 2002
DS1003/DS1004 Installation and Configuration Guide for Modular and Multiprocessor Systems July 2001
DS1005 Installation and Configuration Guide for Modular and Multiprocessor Systems May 2002
DS1102 Installation and Configuration Guide September 2001
DS1103 Installation and Configuration Guide May 2002
DS1104 Installation and Configuration Guide May 2002
MicroAutoBox Installation and Configuration Guide May 2002
dSPACE Simulator Compact Installation and Configuration Guide May 2002
dSPACE Simulator Mid-Size Installation and Configuration Guide May 2002
RTI and RTI-MP Implementation Guide May 2002
ControlDesk Experiment Guide May 2002
ControlDesk Automation Guide July 2001 / May 2002
ControlDesk Test Automation Guide July 2001 / May 2002
MLIB/MTRACE Interface and Trace Libraries July 2001
MotionDesk 3-D Online Visualization Guide May 2002
RealMotion 3-D Visualization Guide

January 2001

 

Software Bundles CDP

The following Software Bundles Control Development Packages (CDP) are
included on this Release.

The CDPs contain ControlDesk Standard, RTI and MLIB/MTRACE.
The CDP1003-MP and CDP1005-MP packages for multiprocessor systems
also include RTI-MP in addition to the other CDP packages.

CDP for singleprocessor systems Version
ControlDesk Standard 2.2
RTI 4.3
MLIB/MTRACE 4.4
CDP-MP for multiprocessor systems Version
ControlDesk Standard 2.2
RTI 4.3
RTI-MP 4.3
MLIB/MTRACE 4.4
 
 


Note: All product dependencies for Release 3.4 are handled automatically by the installation program.