Qualification of dSPACE Release 2014-A for MATLAB R2014a
dSPACE Release 2014-A has subsequently been qualified for the use with MATLAB R2014a.
To achieve full compatibility, the following patches must be installed
Release 2014-A Implementation-Software Service Pack 2, or newer
VEOS 3.2p3, or newer.
Other products can be used with MATLAB R2014a with their original versions contained in Release 2014-A, except for TargetLink 3.5 and Model Compare 2.4, that do not support MATLAB R2014a at all.
Using RTI, ConfigurationDesk, or VEOS it is still necessary to execute the revertInlineParametersOffToR2013b command before building the (real-time) application. Refer to Support of MATLAB R2014a with dSPACE Release 2014-A.
Note
Even with the above mentioned patches installed, you will get warning messages when connecting an Installation Set from Release 2014-A with MATLAB R2014a.
We decided to keep this behavior also for the modified products.
Additionally you will always get warning messages when installing Release 2014-A under MATLAB R2014a.
| Date | 2014-05-15 |
| Software-Typ | Implementierungssoftware |
| Produkt | ConfigurationDesk, RTI (Real-Time Interface) |
| Informationstyp | Mitteilungen |
| Informationskategorie | Migration, Versionen und Kompatibilität |
| dSPACE Release | 2014-A |
Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.
Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.