MicroAutoBox Variants

Hardware Concept

A MicroAutoBox system consists of two or three boards:

  • One DS1401 Base board
  • One or two I/O boards (DS15xx)

Optionally, the MicroAutoBox Embedded PC is integrated in a
MicroAutoBox system.

  • MicroAutoBox Hardware Concept ds1401_system_overview_2017-a.pdf PDF, 129.0 KB

Versions & Compatibility

The major updates of the DS1401 base boards for MicroAutoBox and MicroAutoBox II and the I/O boards are listed below.

Note that some features require certain versions of the boot firmware and that their availability might depend on the dSPACE Release used for building the real-time application.

As of Release 2016-A only MicroAutoBox II is supported.

  • MicroAutoBox II Board Revisions ds1401_board_revisions_2017-a.pdf PDF, 130.2 KB
  • As of Release 2016-A only MicroAutoBox II is supported.

  • MicroAutoBox and MicroAutoBox II Board Revisions (Release 2015-B) microautoboxoverviewofboardrevisions_release2015b.pdf PDF, 59.3 KB
Verwandte Themen Produktinformationen
Tags
Date 2016-12-20
Produkt MicroAutoBox
Informationstyp Referenzinformationen
Informationskategorie Versionen und Kompatibilität
dSPACE Release 2018-B, 2018-A, 2017-B , 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, Bis 2013-A

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.