About This Training
Integrating automotive sensors and actuators is a key task in rapid prototyping performed for electronic control unit functions. The dSPACE RapidPro hardware provides unprecedented flexibility in adapting sensor and actuator signals to prototyping platforms (dSPACE MicroAutoBox/AutoBox/MicroLabBox). The RapidPro training gives you a step-by-step introduction to using the RapidPro software and hardware together with a dSPACE prototyping system. You will learn how to configure the RapidPro system with the ConfigurationDesk for RapidPro configuration software and to implement the required I/O with the RapidPro Control Unit Blockset if you work with a RapidPro control unit. If you are not familiar with the dSPACE prototyping systems or with the ControlDesk and Real-Time Interface software, it is recommended to request this course in combination with the dSPACE Real-Time Systems course.
Course Content
- Introduction to the RapidPro hardware
- Introduction to ConfigurationDesk for RapidPro
- Monitoring and diagnostics of a RapidPro System
- Introduction to the RapidPro RTI blocksets
Target Group
- Engineers working with rapid prototyping
- Engineers who want to use the dSPACE prototyping systems and the RapidPro hardware and software
| Dates | Location | |
| On request | ||