ConfigurationDesk Auto Port Connection Program

This program automatically connects Functionport and Modelport in the project file of ConfigurationDesk.

This program is effective in the following cases.

1. Application design without Modelport propagation from ConfigurationDesk to Simulink
2. System migration from incompatible interfaces.
3. To get the report of port connection

Sample images

Cautions

Please note that the utilities are not part of an official dSPACE release and therefore not subjected to the same quality assurance measures as an official dSPACE release. dSPACE GmbH makes no warranty of any kind with regard to these utilities, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. dSPACE GmbH shall not be liable for errors contained herein or direct, indirect, special, incidental, or consequential damages in connection with the furnishing, performance, or use of these utilities.

Origin

This article was written by dSPACE Japan K. K.